Panasonic BM-ET300AE Manuale di istruzioni per l'uso - Pagina 18

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Fotocamera digitale Panasonic BM-ET300AE. Panasonic BM-ET300AE 35. Iris camera

Stampa la pagina

Panasonic BM-ET300AE Manuale di istruzioni per l'uso

■ Installation

Cautions:

• Mount the iris camera to the flat and firm wall with the

supplied mounting bracket. Besides, secure the iris

camera and bracket with the supplied mounting screw,

at the time of the mounting. Otherwise, it may cause

dropping, trouble or injury.

• Check if the wall has enough strength for mounting and

no dents. Otherwise, the rear tamper detection switch

will not be pressed and the tamper detection mode will

be activated.

The iris camera can be mounted over the wall as

described.

1. Bury the anchor into the wall. (Refer to the illustration of

"Dimensions of the Mounting Bracket".) The anchor bolt

should meet the standards shown in the illustration.

Notes:

6 mm {0.24 in.} or less

φ13 mm

φ11.5 mm

{0.51 in.}

{0.45 in.}

or less

Anchor bolt

Washer

Mounting bracket

1 mm {0.04 in.} (D)

• Wall's capacity is 100 N or more.

• Anchor bolt's capacity is 100 N or more (per one).

• Take a side view to make sure that all the mounting

hook holes of the iris camera have been hung over the

mounting hooks of the mounting bracket. If the rear

tamper detection switch is not be pressed, the iris cam-

era may not work properly.

Wall

Equivalent to

anchor M6

Wall

Tamper detection

switch

20 mm

{0.79 in.}

27 mm

{1.06 in.}

73.5 mm

{2.89 in.}

16 mm

83.7 mm {3.29 in.}

{0.63 in.}

Projection of the tamperproof switch

Dimensions of the mounting bracket

2. Attach the iris camera to the mounting bracket.

Anchor bolt

(1)

Attach the supplied

mounting bracket to the

wall, and then attach the

iris camera to the

mounting bracket.

Note: If you lay cables along a wall surface, replace the cable hole

cover on the bottom of the iris camera. (Refer to p.12.)

192 mm {7.56 in.}

150 mm {5.90 in.}

Mounting

hook (x4)

41 mm

{1.61 in.}

30 mm

{1.18 in.}

50 mm {1.97 in.}

Mounting hook (x4)

Mounting

bracket

Video cable and power cable

(Refer to p. 16 for the

specifications of these cables.)

(2)

Hang the mounting hook

holes of the iris camera

over the mounting hooks

of the mounting bracket.

(3) Fix the iris camera and

mounting bracket with the

supplied mounting screw.

(4) Connect the cables to the

iris camera.