Diamond H2O Reliant DRS4-EM-66 Manuale - Pagina 2
Sfoglia online o scarica il pdf Manuale per Distributore d'acqua Diamond H2O Reliant DRS4-EM-66. Diamond H2O Reliant DRS4-EM-66 19. Reliant drs4 series single tank water softener
Stampa la pagina- 1. Table of Contents
- 2. Place the Tanks Near a Water Source
- 3. Setting up the Tank
- 4. Connect the Brine Tank
- 5. Connect the Valves to the Water Source
- 6. Electrical
- 7. Start up the System for the First Time
- 8. Bypass Valve Operations
- 9. Main Operating States
- 10. Program the Valve
- 11. Troubleshooting
- 12. System Specifications
- 13. Error Codes
Inspect the packaging of the equipment to confirm that nothing was
damaged during shipping. (Figure 1)
Remove the resin tank(s) and valve(s) from the packaging. Make sure
everything is included and without damage. Notice that the valve(s), Brine
Line 'T', brine line hose, and MAV valve will be found in the brine tank.
Below is a checklist with everything you should have received.
_____ 1) Control Valve
(Figure 2)
_____ 2) Brine Tank (Figure 4)
_____ 3) Brine Line Hose
_____ 4) Softener Tank (Figure 5)
_____ 5) Correct Amount of Resin (from Model and Media Requirements Table on page 2)
Call Diamond H2O right away if anything is missing. Contact the freight company immediately if
anything is damaged. Diamond H2O will not be liable for any damage received after shipping.
Packaged By: ___________________________________
Received By: ___________________________________
Set Up Instructions for DRS4 Series Single Tank
Figure 4:
Brine Tank
Figure 2: Control Valve
Figure 5:
Softener Tank
Date: _______________
Date: _______________
pg. 1