HP 10500 series Specifiche tecniche - Pagina 4

Sfoglia online o scarica il pdf Specifiche tecniche per Interruttore HP 10500 series. HP 10500 series 20. Type d w/comware v7 os mpu (jh198a). product end-of-life disassembly
Anche per HP 10500 series: Specifiche tecniche (42 pagine), Scheda tecnica (8 pagine), Scheda tecnica (20 pagine), Istruzioni per lo smontaggio (3 pagine)

Stampa la pagina

Data sheet | HP 10500 Switch Series

• IEEE 802.3ad LACP

Supports up to 128 trunks, each with 8 links per trunk; and provides support for static or

dynamic groups and a user-selectable hashing algorithm

• Graceful restart

Supports graceful restart for OSPF, IS-IS, BGP, LDP, and RSVP; the network remains stable

during the active-standby switchover; after the switchover, the device quickly learns the

network routes by communicating with adjacent routers; forwarding remains uninterrupted

during the switchover to achieve nonstop forwarding (NSF)

• Ultra-fast protocol convergence (sub-second) with standards-based failure

detection—bidirectional forwarding detection

Enables link connectivity monitoring and reduces network convergence time for the routing

information protocol (RIP), OSPF, BGP, IS-IS, VRRP, MPLS, and IRF

• Smart link

Allows 100 ms failover between links

• Multiple internal power supplies

Provides high reliability; the 10504 switch provides 3+1 redundancy; the 10508, 10508-V, and

10512 switches provide 5+1 redundancy

Virtual private network (VPN)

• IPSec

Provides secure tunneling over an untrusted network such as the Internet or a wireless

network; offers data confidentiality, authenticity, and integrity between two network

endpoints

• Generic Routing Encapsulation (GRE)

Transports Layer 2 connectivity over a Layer 3 path in a secured way; enables the segregation

of traffic from site to site

• Manual or automatic Internet Key Exchange (IKE)

Provides both manual or automatic key exchange required for the algorithms used in

encryption or authentication; auto-IKE allows automated management of the public key

exchange, providing the highest levels of encryption

Management

• Management interface control

Enables or disables each of the following interfaces depending on security preferences:

console port, telnet port, or reset button

• Industry-standard CLI with a hierarchical structure

Reduces training time and expenses, and increases productivity in multivendor installations

• Management security

Restricts access to critical configuration commands; offers multiple privilege levels with

password protection; ACLs provide telnet and SNMP access; local and remote syslog

capabilities allow logging of all access

• SNMPv1, v2, and v3

Provides complete support of SNMP; provide full support of industry-standard Management

Information Base (MIB) plus private extensions; SNMPv3 supports increased security using

encryption

• sFlow® (RFC 3176)

Provides scalable ASIC-based wirespeed network monitoring and accounting with no impact

on network performance; this allows network operators to gather a variety of sophisticated

network statistics and information for capacity planning and real-time network monitoring

purposes