HP 316095-B21 - StorageWorks Edge Switch 2/24 Nota di rilascio - Pagina 29

Sfoglia online o scarica il pdf Nota di rilascio per Interruttore HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 32. Edge switch release notes
Anche per HP 316095-B21 - StorageWorks Edge Switch 2/24: Manuale di aggiornamento (9 pagine), Manuale (41 pagine), Manuale (40 pagine), Nota di rilascio (27 pagine), Manuale (26 pagine), Nota di rilascio (27 pagine), Nota di rilascio (25 pagine), Manuale di istruzioni per l'installazione (24 pagine), Nota di rilascio (23 pagine), Nota di rilascio (23 pagine), Nota di rilascio (22 pagine), Nota di rilascio (23 pagine), Nota di rilascio (19 pagine), Nota di rilascio (19 pagine), Nota di rilascio (18 pagine), Manuale di istruzioni (17 pagine), Nota di rilascio (17 pagine), Istruzioni per l'aggiornamento (16 pagine), Manuale di istruzioni (16 pagine), Manuale di istruzioni per l'installazione (16 pagine), Nota di rilascio (16 pagine), Nota di rilascio (17 pagine), Nota di rilascio (17 pagine), Nota di rilascio (11 pagine)

Cannot export to disk on remote AIX client

An exception is occurring when an export to disk operation is performed on a remote

AIX client platform.

Cannot import a Physical Map

If an attempt is made to import a Physical Map by itself, the import fails.

Workaround

A Physical Map can be imported as part of a full SAN import ﬁle.

Errors drop down list is not available

The Errors drop down list is not available in the Performance Graph for HAFM 08.06.00.

Cannot conﬁgure a blank nickname

Nicknames cannot be left blank. If no nickname has been conﬁgured yet, the user can

select cancel to leave a nickname blank. Once a nickname has been conﬁgured, it

cannot be changed to be blank, that is, the nickname cannot be deleted. The nickname

can be assigned a new name.

Support for speed Auto-Negotiate

Auto-negotiate is supported. However, HP recommends that the port speed for E_Ports

(for Interswitch Links, or ISLs) be set to a speciﬁc port speed (1Gb/sec or 2Gb/sec, as

appropriate for the speed of the directors or edge switches being connected) instead

of to Negotiate. Using a speciﬁc port speed decreases the time for a fabric build in

response to some perturbation event in the fabric. Similarly, setting a speciﬁc port speed

for N_Ports also decreases fabric build time. However, setting a speciﬁc port speed for

N_Ports is not required.

There are a few older HBA devices that do not always succeed in logging in to a switch

port when the port speed is set for auto-negotiate.

Workaround

If an older HBA has difﬁculty logging into a switch port that has its port speed

conﬁgured as Negotiate, conﬁgure that port speed to 1Gb/sec or 2Gb/sec according to

the operation speed of the HBA connected to that port.

Losing LAN connection to the HAFM appliance when logged in to HAFM

If the LAN connection to the HAFM appliance is lost while you are logged in to HAFM,

the application may stop.

HA-Fabric Manager release notes