HP 316095-B21 - StorageWorks Edge Switch 2/24 Nota di rilascio - Pagina 16

Sfoglia online o scarica il pdf Nota di rilascio per Interruttore HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 16. Edge switch release notes
Anche per HP 316095-B21 - StorageWorks Edge Switch 2/24: Manuale di aggiornamento (9 pagine), Manuale (41 pagine), Manuale (40 pagine), Nota di rilascio (32 pagine), Nota di rilascio (27 pagine), Manuale (26 pagine), Nota di rilascio (27 pagine), Nota di rilascio (25 pagine), Manuale di istruzioni per l'installazione (24 pagine), Nota di rilascio (23 pagine), Nota di rilascio (23 pagine), Nota di rilascio (22 pagine), Nota di rilascio (23 pagine), Nota di rilascio (19 pagine), Nota di rilascio (19 pagine), Nota di rilascio (18 pagine), Manuale di istruzioni (17 pagine), Nota di rilascio (17 pagine), Istruzioni per l'aggiornamento (16 pagine), Manuale di istruzioni (16 pagine), Manuale di istruzioni per l'installazione (16 pagine), Nota di rilascio (17 pagine), Nota di rilascio (17 pagine), Nota di rilascio (11 pagine)

Known Issues

Replacing CD-ROM with ZIP Drive

The CD-ROM should be installed in the Windows 2000 HAFM server only for

loading and configuring the HAFM software, or for adding new director or edge

switch firmware to the HAFM Firmware libraries. The CD-ROM should be

replaced with the ZIP drive module for normal operation of the HAFM to allow

for ZIP drive backups of the SAN configuration information.

Losing LAN Connection to the HAFM Server Before Logging in to the

If the LAN connection to the Windows 2000 HAFM server is lost before logging

on to the HAFM application, you cannot log in to the application. If the LAN

connection to the HAFM server is lost while the HAFM application is running, the

application will stop and the following error message displays "Connection

to the HAFM server lost. Click OK to exit the

application."

Workaround

The LAN connection must be restored, and the HAFM server must be rebooted to

restore normal HAFM operation. Neither stopping the HAFM application nor

rebooting the server has any impact on the Fibre Channel operations of any switch

or director. Only monitoring switch operations, logging events, and implementing

configuration changes are interrupted.

Effect of No LAN Connection to HAFM Server During Boot Up

If the HAFM server has no LAN connection while booting up, but is connected

after booting up, the IP address that displays in the HAFM Product View window

title bar may be incorrect.

Workaround

This can be corrected by restoring the LAN connection, exiting the HAFM

application, restarting the HAFM application, and logging back in.

HA-Fabric Manager Release Notes