HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch Manuale di installazione - Pagina 14
Sfoglia online o scarica il pdf Manuale di installazione per Interruttore HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch. HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch 28. Fabric clustering system 24-port 4x fabric copper switch installation guide, march 2005
Anche per HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch: White Paper (13 pagine), Manuale di implementazione (9 pagine)
Stampa la pagina
HP-UX Integrity Installation Overview & Planning
Install HP Fabric Clustering System Switches
Step 5. Fit the sliding rails over the fixed rails with the flanges facing outward until the flanges meet the
rack.
Figure 1-10 Fit Sliding Rail over Fixed Rail
Step 6. Attach the rails to the rack, both sides as shown in Figure 1-11.
CAUTION
Figure 1-11 Attach Sliding Rail to Rack
Step 7. Securely attach all rails to the rack.
Remove Shipping Sleeve
Underneath each power supply is a shipping sleeve. Take the bezel off and remove the entire sleeve by gently
pulling on the tab. Replace the bezel.
Figure 1-12
Remove Shipping Sleeve From Under Power Supply
14
Keep switch supported until rail is attached to the rack.
Chapter 1