AQUATECH Delphin Manuale di istruzioni - Pagina 6
Sfoglia online o scarica il pdf Manuale di istruzioni per Camera Accessories AQUATECH Delphin. AQUATECH Delphin 6. Housing
Anche per AQUATECH Delphin: Manuale di istruzioni (5 pagine)
CLEANING AND STORAGE
DO
- Clean the outside of your Sport Housing with
fresh water after each use.
- Wipe away any debris that may have gathered on
the threads, buttons, or O-ring grooves.
- Occasionally take off any accessories you may
purchase (i.e. Pistol or Flash Mount) to help keep
corrosion from occurring.
- Carefully wipe down the inside of the Sport
Housing with a wet cloth. Make sure not to get any
of the electronics wet.
DO NOT
- Store your housing fully clamped down for long
periods of time. Doing this will put unneeded strain
on your Clips and O-rings.
- Leave your Sport Housing gear in temperatures
greater than 50 C (125 F)
- Use alcohol-based products to clean the Back
Plate or port element as this may damage the
product.
- Leave any accessories like Pistol Grips, Poles
or Flash Mounts attached on the Housing while
storing. Doing so can cause them to seize up and
be extremely difficult to remove.
- Travel with your Sport Housing clamped down
with Lens Ports attached. Remove all parts.
MAINTENANCE AND REPAIR
With proper care your Sport Housing will last for
many years. If in time you do notice any problems
that come up or if there is any damage to the
equipment please contact AquaTech directly at
[email protected] for repairs or servicing.
Occasionally use a light amount of the grease
provided for the metal shafts of your small push
controls. This will help prevent the controls from
sticking. Over time you may notice some rust
underneath the strikes on the back plate. This
is normal and will not affect the integrity of the
product and thus is not covered by AquaTech's
warranty. However, you can help prevent this by
washing your Sport Housing with fresh water after
each use. If your Sport Housing is used on a regular
basis (more than 100 times a year) an annual
service by one of our qualified team members
should considered. Especially those working
in the saltwater – one of the most corrosive
environments.