AQUATECH Pro Mount V4 Manuale di istruzioni - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per Camera Accessories AQUATECH Pro Mount V4. AQUATECH Pro Mount V4 5.

Thank you for purchasing this AquaTech Pro Mount.
Overview:
The Pro Mount V3 is our most versatile Pro Mount to
date. It is designed to work with a variety of modern
AquaTech housings with 2 or 4 inserts at the top of the
water housing.
The Pro Mount V3 is designed to accommodate the new
LUX and SYNC Housings featuring a fast removal slot for
these new additions to the AquaTech Water Housing line
up. It can however still also support a Go Pro camera,
Lume Cube lighting and other accessories that have the
go pro style mounting profile.
It is also possible to use the AxisGO Go Mount to secure
your AxisGO housing to the top of your water housing
using the Pro Mount V3.
The Pro Mount V3 can be installed on the Side Handle
Mount or on the top mount of all the housing models
below:
EDGE
REFLEX
EVO III
Elite II
The Go Pro Hero 7 & 6/5 and Hero Session cameras
require the use of an additional housing or mounting
cage option supplied by Go Pro to utilise the AquaTech
mount
. **Note: This option is only available to AxisGO Housings
pre AxisGO 12. AxisGO 12 Housings are not mountable to
our Sport Housing range via this method.
You can also visit our
website
more tips and information.
and
YouTube
channel for
What's in the Box
Pro Mount V4 * Pro Mount V4 is for use with THE
EDGE Sport Housing Range only. Pro Mount V3 is
required for use with any other of AquaTech Sport
Housings. Using the Pro Mount V4 on any other
model than the EDGE range will result in irreparable
damage to your Sport Housing. DO NOT USE THE
PRO MOUNT V4 ON EVO REFLEX OR ELITE SPORT
HOUSINGS, PRO MOUNT V3 REQUIRED.
4 x M16mm mounting screws
1 x Hex Key installation tool
Table of Contents
What's in the box
Nomenclature
Initial setup
Using the Pro Mount underwater
Safety information
Maintenance and repair
Limit of liability
Warranty
Servicing
Returns
Legals
1