Aquatech Pressmain MG-T Manuale di istruzioni - Pagina 20
Sfoglia online o scarica il pdf Manuale di istruzioni per Unità di controllo Aquatech Pressmain MG-T. Aquatech Pressmain MG-T 20. Tankmatic tank level/temperature monitoring/control unit with smart relay control
Stampa la pagina
SERIAL No.
THE SERIAL & MODEL NUMBERS MUST BE QUOTED WHEN REQUESTING ASSISTANCE
ELECTRICAL DATA:
Supply
Full load current of unit
Max. unit loading:
Control Voltage 24 volts DC
PARAMETERS as factory set as amended on commissioning
PARAMETER
Low level ON/OFF
Low level approach ON/OFF
High level ON/OFF
High level approach ON/OFF
Low temperature ON/OFF
High temperature ON/OFF
*Solenoid Open (OFF)
*Solenoid Close (ON)
Important note: For each parameter, the ON/OFF parameters MUST be set to the same value.
(*with the exception of Solenoid Open/Close parameter, where fitted)
Some of the above parameters may not be seen, depending on unit type.
On commissioning it may be found necessary to modify these settings. Providing this information is left with
the equipment, the figures will be updated by the commissioning engineer.
Updated by commissioning engineer ................................................... Date ....................
Aquatech‐Pressmain Instruction manual\Tankmatic smart relay MG‐LT
OPERATING PARAMETERS
...........
volts
.........
Amps
.........
Kw
Tank 1 Tank 2 Tank 3
MODEL
........... Ph
Tank 4
Tankmatic Smart Relay
.........
Hz
Tank 1 Tank 2 Tank 3 Tank 4
20