HP ProCurve 5300xl Manuale supplementare - Pagina 27

Sfoglia online o scarica il pdf Manuale supplementare per Interruttore HP ProCurve 5300xl. HP ProCurve 5300xl 38. Access controller xl module to the hp procurve 6400cl/5300xl/3400cl
Anche per HP ProCurve 5300xl: Scheda tecnica (12 pagine)

Stampa la pagina

Syntax:

enable extended-commands

Changes the CLI to the access controller extended com

mands context. A limited set of commands from the

720wl CLI is provided here. See "Using the ACM's

Extended CLI" for more information.

Syntax:

exit

Leaves the access controller context and returns the CLI

to the global configuration context.

Syntax:

[no] ip address <<ip-addr>/<1-32> | <ip addr> <mask>>

Statically configures the ip address and subnet mask

for the ACM. The no form removes the fixed ip address

and enables DHCP. (Default: DHCP)

Syntax:

[no] ip default-gateway <ip-addr>

Statically configures the numeric ip-addr of the default

gateway. If DHCP is enabled, this command overrides

the default gateway supplied by DHCP.

Syntax:

[no] page

Turns on or off paging of the CLI command responses

and CLI command stack replay (the up arrow func

tion).

Syntax:

terminal <length <2-1000> | width <61-1920>>

length <2-1000> Sets the number of lines that are dis

played between pauses when page is on. The initial

setting is inherited from the previous context. This

setting remains in effect when this context is exited.

width <61-1920> Sets the maximum line width to be used

for CLI output or CLI input. Lines longer than the

specified value wrap to the next line. The initial setting

is inherited from the previous context. This setting

remains in effect when this context is exited.

Configuring the Access Controller xl Module