HP StorageWorks 2/16 - SAN Switch Manuale di installazione - Pagina 3

Sfoglia online o scarica il pdf Manuale di installazione per Interruttore HP StorageWorks 2/16 - SAN Switch. HP StorageWorks 2/16 - SAN Switch 14. Fabric os commands
Anche per HP StorageWorks 2/16 - SAN Switch: Manuale di aggiornamento (9 pagine), Manuale di istruzioni per l'installazione (20 pagine), Manuale d'uso (22 pagine), Note di rilascio del firmware (14 pagine), Nota di rilascio (32 pagine), Nota di rilascio (16 pagine), Nota di rilascio (10 pagine), Manuale di riferimento rapido (5 pagine)

Installing the Switch in a Rack Using the SAN Switch Universal

Rack Mount Kit

This section provides instructions for installing the SAN Switch 2/32, SAN

Switch 2/16, or SAN Switch 2/8 in an HP System/e rack, or in an HP 9000 Series

or comparable EIA rack using the SAN Switch Universal Rack Mount Kit, part

number 331148-B21.

Figure 1: SAN Switch 2/16 rack-mounted switch

Note:

The following items are required to install the switch in a rack:

HP StorageWorks SAN Switch 2/8|16|32 Installation Guide

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit

The Universal Rack Mount Kit installation requires two technicians.

SAN Switch 2/32, SAN Switch 2/16, or SAN Switch 2/8

Power cables

#2 Phillips screwdriver

7/16-inch wrench or socket

The SAN Switch Universal Rack Mount Kit rails and rail mounting hardware

listed below:

(2) Rear mounting brackets

Addendum Pg