HP StorageWorks 2/24 - Edge Switch Nota di rilascio - Pagina 19

Sfoglia online o scarica il pdf Nota di rilascio per Interruttore HP StorageWorks 2/24 - Edge Switch. HP StorageWorks 2/24 - Edge Switch 19. Fw 04.01.02 and sw 06.03.01 ha-fabric manager release notes
Anche per HP StorageWorks 2/24 - Edge Switch: Nota di rilascio (32 pagine), Nota di rilascio (27 pagine), Manuale (26 pagine), Nota di rilascio (16 pagine), Nota di rilascio (17 pagine), Nota di rilascio (10 pagine)

Stampa la pagina

HP StorageWorks 2/24 - Edge Switch Nota di rilascio

Workaround

There are a two ways to assure the pubic and private designations of the LANs.

Note:

director. Only monitoring switch operations, logging events, and implementing

configuration changes are interrupted.

HA-Fabric Manager Release Notes

If you use a private LAN IP address, i.e. 10.x.x.x, this causes this LAN to be

designated as the private LAN. You must also have the public LAN

connection active when the HAFM sever is booting up, or else the HAFM

application will interpret this as a single LAN connection configuration, and

the 10.x.x.x LAN will be designated as the LAN for remote client sessions.

You can configure a specified Ethernet interface on the HAFM server to be

the public LAN (to listen for remote client connections). To configure this

feature, you must manually edit a file on the HAFM server to explicitly

specify which IP address HAFM should use as the public LAN.

Perform the following to configure an Ethernet interface:

a. Open the config.properties file in directory C:\Program

Files\HAFM\, and add the following line:

ServerRmiIpAddress=x.x.x.x

where x.x.x.x is the IP address assigned to one of the Ethernet LAN

adapters which is to be used as the public LAN. This entry is case

sensitive and must be made exactly as shown. Once this line has been

added, the HAFM server must be rebooted.

This does not impact the Fibre Channel operations of any edge switch or

If the public LAN IP address of the HAFM server is ever changed, this

file must be edited again to reflect the new IP address.

Known Issues