HP StorageWorks 8B - FC Entry Switch Nota di rilascio - Pagina 24

Sfoglia online o scarica il pdf Nota di rilascio per Interruttore HP StorageWorks 8B - FC Entry Switch. HP StorageWorks 8B - FC Entry Switch 26. Fabric os release notes version 3.0.1b
Anche per HP StorageWorks 8B - FC Entry Switch: Manuale di aggiornamento (9 pagine), Manuale di istruzioni per l'installazione (20 pagine), Manuale d'uso (22 pagine), Note di rilascio del firmware (14 pagine), Manuale di installazione (14 pagine), Manuale (50 pagine), Manuale d'uso (44 pagine), Manuale d'uso (44 pagine), Manuale d'uso (38 pagine), Manuale d'uso (38 pagine), Manuale d'uso (37 pagine), Manuale d'uso (30 pagine), Nota di rilascio (16 pagine)

Issues and Workarounds

JNI 6460 HBA Negotiation

If a port speed is changed to 1 Gb and then back to AN, the JNI 6460 HBA

negotiates at 1 Gb instead of 2 Gb.

To fix this problem, set the port speed to 2 Gb, or disconnect the cable and then

reconnect it. The JNI 6460 HBA will again negotiate at 2 Gb.

configdownload Command

If there are errors in the security database and security is enabled, the

configdownload command will fail.

To fix this problem, resolve the security database errors and reissue the

configdownload command.

If you log in as the root account in order to launch switch admin, any admin/user

account information changes you make will not be applied to the switch.

To avoid this problem, log in as an admin level account.

syslog Message not Forwarded

If Quiet mode is enabled, syslog will no longer forward messages to any syslog

configured management stations. (Note that the error messages are still available

in the Error Log [for example, errShow, errDump].)

To avoid this problem, do not use Quiet mode.

Relocating Switch Port Cable

Relocating the switch port cable causes the loss of dynamic end-to-end monitors

residing on the port.

Dynamic end-to-end monitors do not move with the device. To avoid the problem,

when relocating the device, delete the monitor and add it back manually.

SAN Switch 2/8 Version 3.1.x Release Notes