HP StorageWorks Core Switch 2/64 Nota di rilascio - Pagina 16

Sfoglia online o scarica il pdf Nota di rilascio per Interruttore HP StorageWorks Core Switch 2/64. HP StorageWorks Core Switch 2/64 20. Director power cord advisory instruction
Anche per HP StorageWorks Core Switch 2/64: Specifiche rapide (13 pagine), Nota di rilascio (27 pagine), Nota di rilascio (24 pagine), Nota di rilascio (13 pagine), Nota di rilascio (11 pagine), Istruzioni (1 pagine)

Stampa la pagina

HP StorageWorks Core Switch 2/64 Nota di rilascio

Known Issues

This section describes the known issues related to the Director 2/64 and

Director 2/140.

Embedded Web Server access to modify zones is limited to first 255

zones

If you have an active zone set of greater than 255 zones, you will not be able to

access the zones past the 255th zone using the Embedded Web Server (EWS). The

higher number zone names are listed, but when accessed to modify the zone (for

example, the zone that would be numbered "n"), you will get the zone member list

for the (n-255) zone. This will be corrected in a future firmware release.

Workaround

Using the HAFM server to manage directors and edge switches will allow you to

modify zones in zone sets with greater than 255 zones.

SNMP trap reports incorrect FRU position

When an SNMP trap is sent and reports a FRU position number, the reported

number is one greater than the actual FRU position that caused the SNMP trap to

be issued.

Workaround

None.

Some IP Addresses must be Avoided

When you select IP addresses for edge switches and directors, and also if you

select a static IP address for the HAFM server, do not use IP addresses in the

following range:

192.168.0.0 through 192.168.0.255—This subnet is used internally to the

HAFM server. Using an IP address in this range causes the call-home feature

to function incorrectly.

Director Release Notes