HP StorageWorks XP10000 - Disk Array Manuale di configurazione del sistema - Pagina 25

Repeat step 1 for each device on the disk array.

Creating the mount table

Add the new devices to the /etc/fstab ﬁle to specify the automount parameters for

each device.

Edit the /etc/fstab ﬁle to add one line for each device to be automounted.

Each line of the ﬁle contains: (A) device name, (B) mount point, (C) ﬁle system

type ("ext2"), (D) mount options ("defaults"), (E) enhance parameter ("1"), and

(F) fsck pass 2.

Example

Make an entry for each device. After all the entires are made, save the ﬁle and

exit the editor.

Reboot the system.

Display the mounted devices using the df –h command and verify that the devices

were automounted.

Example

Verifying ﬁle system operation

Verify ﬁle system operation by copying a ﬁle to each device.

/dev/sdb

/A5700F_ID08

/dev/sdc

/A5700F_ID09

/dev/sdd

/A5700F_ID10

# df -h

Filesystem Size Used Avail Used% Mounted on

/dev/sda1

1.8G 890M 866M

/dev/sdb1

1.9G 1.0G 803M

/dev/sdc1

2.2G

Disk Array XP operating system conﬁguration guide: Linux

ext2

defaults

ext2

defaults

ext2

defaults

51%

57%

/usr

13k 2.1G

/A5700F-LU00