HP v1810g Manuale di configurazione rapida

Sfoglia online o scarica il pdf Manuale di configurazione rapida per Interruttore HP v1810g. HP v1810g 4.

HP Switch Quick Setup Guide

For more detailed instructions and information, view or download the documentation for your switch at

www.hp.com/networking/support.

Unpack and check included parts:

• Switch

• Accessory kit

• Power cord

• Documentation kit

. Power on and verify selftest by connecting

the power cord.

Note: The switch does not contain a power switch.

It is turned on by connecting the power cord.

Install the switch.

To attach the mounting brackets to the switch, use a #1

Phillips (cross-head) screwdriver and the included 8-mm

M4 screws.

To mount the switch to a wall or wood surface, use two

5/8-inch (15.875 mm) number 12 wood screws (not

included).

Rack Mounting

Prepare for installation.

To avoid personal injury or product damage, review the

"Safety Precautions" on page 3.

After selftest:

Power LED = On

Fault LED = Off

Table or Desktop

Wall Mounting

Port LEDs