HP XP20000/XP24000 Manuale di configurazione - Pagina 20

Sfoglia online o scarica il pdf Manuale di configurazione per Interruttore HP XP20000/XP24000. HP XP20000/XP24000 46. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Anche per HP XP20000/XP24000: Nota di rilascio (13 pagine), Manuale di integrazione (29 pagine), Nota di rilascio (4 pagine), Manuale dell'amministratore (50 pagine), Manuale di configurazione (42 pagine), Manuale di configurazione (40 pagine), Manuale di configurazione (40 pagine), Manuale di configurazione (36 pagine), Manuale di configurazione (36 pagine), Manuale di configurazione (30 pagine), Manuale di configurazione (36 pagine), Nota di rilascio (5 pagine), Manuale di configurazione (46 pagine), Manuale di riferimento (46 pagine), Manuale di configurazione (40 pagine), Manuale di configurazione (44 pagine), Manuale di configurazione (38 pagine), Manuale di configurazione (34 pagine), Manuale di configurazione (30 pagine), Manuale di configurazione (30 pagine)

HP XP20000/XP24000 Manuale di configurazione
NetWare prompt>
1. 0x000B: [V6E0-A2-D7D:0] HP OPEN-3 rev:0111
2. 0x000C: [V6E0-A2-D7D:1] HP OPEN-3 rev:0111
:
:
3.
Record the device number for each new device on the worksheet in
This information will be useful later during disk partitioning and volume creation.
4.
Verify that all new disk devices are listed.

Configuring disk devices

Configure the disks in the disk array using the same procedure for configuring any new disk on the
host. This includes the following procedures:
1.

Creating the disk partitions

2.
Assigning the new devices to volumes
3.
Mounting the new volumes
4.
Verifying client operations
Creating scripts to configure all devices at once may save you considerable time.
Creating the disk partitions
Before you create the disk partitions, consult the Novell documentation for confirmation about the
type of partition that is available with your operating system version.
NetWare 5.x
1.
At the server console enter "LOAD NWCONFIG" to load the Configuration Options module.
2.
On the Configuration Options screen, click Standard disk options and press Enter to access the
NetWare disk options.
3.
On the Available Disk Options screen, select Modify disk partitions and Hot Fix and press Enter.
4.
The Available Disk Drives screen lists the devices by device number. Record the device numbers.
On the Available Disk Drives screen, select the device to be partitioned and press Enter.
5.
If the partition table has already been initialized, skip this step. If the partition table has not yet
been initialized, the partition table message is displayed. Press Enter to confirm the message.
When the "Initialize the partition table?" message appears, select Yes and press Enter to initialize
the partition table.
6.
On the Disk Partition Options screen, select Create NetWare disk partition, and press Enter.
7.
You are now prompted to create the partition either automatically or manually. Select the desired
option, and press Enter.
If you select automatic partitioning, NetWare will create the disk partition and hot fix area using
the available disk space (the hot fix area will be approximately two percent of the partition size).
If you select manual partitioning, enter a partition size and hot fix area.
8.
On the Disk Partition Information screen, verify (or enter) the partition size and hot fix data area
size, and press F10 to save the changes. You are returned to the Disk Partition Options screen.
20
Installing and configuring Novell Netware for the XP disk array
LIST DEVICES
"Path
Worksheet" on page 33.