HP Xw460c - ProLiant - Blade Workstation Manuale di istruzioni per l'installazione - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Interruttore HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 8. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Anche per HP Xw460c - ProLiant - Blade Workstation: Manuale di implementazione (35 pagine), Manuale di prevenzione degli errori (12 pagine), Libro bianco tecnico (12 pagine), Aggiornamento del firmware (9 pagine), Manuale di installazione (2 pagine), Manuale delle domande frequenti (14 pagine), Poster di impostazione (9 pagine), Manuale di installazione (33 pagine), Manuale di gestione (28 pagine), Manuale hardware (23 pagine), Panoramica (35 pagine), Manuale d'uso (33 pagine), Manuale di ottimizzazione (13 pagine), Garanzia limitata (10 pagine), Manuale di istruzioni per l'installazione (10 pagine), Istruzioni per l'installazione (4 pagine), Istruzioni per l'installazione (2 pagine)

Step 5 — Re-install the blade workstation

Install the blade workstation access panel

Install the blade workstation in the rack

NOTE:

connecting a keyboard, mouse and monitor to the Local I/O Connector. In either case, the blade

workstation Remote Console Mode should be set to Setup Mode, as described in the

Administrator's Guide for your operating system. Setup Mode is selected during booting of the

blade workstation.

Power up the blade workstation, and select Setup Mode during the boot process. On Linux, Setup

Mode may already be selected.

Step 6 — Install the graphics driver

●

Windows XP: To install the graphics driver, use Windows Explorer to navigate to where the driver

softpaq is saved. Double-click on the softpaq and follow the installation instructions. After

installation is complete, reboot the blade workstation, and set Remote Console Mode to User Mode.

●

RHEL4: To install the graphics driver, navigate to where the driver rpm is saved. As "root" install

the rpm using the command "%: rpm -Uvh <file name>". Using the option "-Uvh" will install the rpm

or upgrade an existing rpm. After installation is complete, reboot the blade workstation, keeping

Remote Console Mode set to Setup Mode (which is the mode used by Linux).

Step 7 — Verify RGS access to the blade workstation

At this point, the blade workstation should be accessible using RGS from a client computer. Follow your

normal RGS connection process to verify that an RGS connection can be made to the blade workstation.

ENWW

To install the graphics driver, HP recommends either using the iLO 2 remote console, or

Step 5 — Re-install the blade workstation