Panasonic WV-CW364S Manuale di istruzioni per l'uso - Pagina 24

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Fotocamera digitale Panasonic WV-CW364S. Panasonic WV-CW364S 36. Vandal resistant fixed dome camera
Anche per Panasonic WV-CW364S: Specifiche tecniche (2 pagine)

Stampa la pagina

Adjust the camera

Pan, tilt and azimuth adjustment

Important:

• Do not touch the iris motor. Failure to

observe this may cause trouble.

• Do not hold the camera by the lens unit

when adjusting panning, tilting, or azimuth.

Detach the inner dome from the camera by

picking the front and rear sides.

Note:

• Do not touch the lens.

At the same time as the pan and tilt adjust-

ments, make the zoom and focus adjustments

in Step 2.

Pick the portion marked

in the illustration as well

as the opposite side.

Pick the portion marked

in the illustration as well

as the opposite side.

q Rotate the panning table to adjust the pan-

ning position of the camera. (Range: 320°)

• The adjusting range is from +180 ° (clock-

wise) to –140 ° (counterclockwise).

• Tighten the panning table lock screw after

adjusting

CCW: –140 °

Panning table

w Rotate the tilting table to adjust the tilting

position of the camera (Range: ±75 °).

• This lens can also be rotated in the reverse

direction, but the image azimuth is

reversed. In such a case, turn the panning

table to the 180 ° side to correct the azi-

muth image.

• When used at an angle that is close to hor-

izontal, it must be noted that the shadow

of the dome cover may be projected.

• Fasten the tilting lock screws of both sides

after adjusting.

Tilting lock

screw (x2)

Variable tilt angle: ±75 °

Panning lock screw

Indication

: CCD up side

CW: +180 °