Panasonic PT-DS100XE ( ) Specifiche tecniche - Pagina 6

Sfoglia online o scarica il pdf Specifiche tecniche per Proiettore Panasonic PT-DS100XE ( ). Panasonic PT-DS100XE ( ) 6. Pt-dz110x series 3-chip dlp projector

Stampa la pagina

Specifications

Model

Power supply

Power consumption

DLP

chip

Panel size

™

Display method

Pixels

Lens

Lamp

Screen size (diagonal)

Brightness*

Centre-to-corner uniformity*

Contrast*

Resolution

Scanning frequency

SDI

HDMI/DVI-D/RGB

(YC

)

Video/S-Video

Optical axis shift

Vertical

Horizontal

Keystone correction range

Installation

Terminals

SDI IN

HDMI IN

DVI-D IN

RGB 1 IN

RGB 2 IN

VIDEO IN

S-VIDEO IN

SERIAL IN

SERIAL OUT

REMOTE 1 IN

REMOTE 1 OUT

REMOTE 2 IN

LAN

Cabinet materials

Dimensions (W × H × D)

Weight

Operating environment

Supplied accessories

* 1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. * 2 With the

over the L AN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal. * 3 1.78 –7.62 m ( 70 –300 inches ) with the

E T-D75LE50. * 4 When using only the K E YSTONE correction. When using both the K E YSTONE and ARC corrections of the Geometric Adjustment function: vertical ± 5°, horizontal ± 5° (vertical ±10° and horizontal ±15° with the

E T-D75LE40 / D75LE8 ). * 5 WUXG A resolution is supported only when the signals are compliant with VESA CV T-RB ( Coordinated Video Timing-Reduced Blanking ). * 6 The operating temperature range is 0°C ( 32°F ) to 40°C (104°F )

when used in High-Altitude mode (1,400 m (4,593 ft) to 2,700 m ( 8,858 ft) ).

N O T E S O N U S E

1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may

result in fire, malfunction, or electric shock.

2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large

sound, or fail to illuminate, due to impact or extended use.

3. The projector uses of high-wattage lamp that becomes very hot during operation. Please observe the following precautions.

• Never place objects on top of the projector while it is operation.

• Make sure there is an unobstructed space of 500 mm (1 ft 8 in) or more around the projector's exhaust openings.

• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection.

When stacking projector units, be sure to provide the amount of space indicated between them. These space require-

ments also apply to installation where only one projector unit is operating at one time and the other unit is used as a

backup.

• If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be between 0°C

Weights and dimensions shown are approximate. Specifications are subject to change without notice. This product may be subject to export

regulations. All other trademarks are the property of their respective trademark owners. Projection Images simulated. DLP, DLP logo and DLP

Medallion logo are trademarks or registered trademarks of Texas Instruments. The PJLink trademark is an application trademark in Japan, the

PT- D Z1 10 X E

220–240 V AC, 5.0 A, 50/60 Hz

920 W (980 VA at 240 V)

(0.3 W with

set to

. *

STANDBY MODE

ECO

8 W with

set to

STANDBY MODE

NORMAL

Both with fan stopped.)

24.4 mm (0.96 in) diagonal (16:10 aspect ratio)

DLP

chip × 3 (R, G, B), DLP

projection system

™

2,304,000 (1,920 × 1,200) × 3,

total of 6,912,000 pixels

Optional powered zoom/focus lenses

355 W UHM lamp × 2 (dual lamp system)

1.78 –15.24 m (70–600 in)*

(16:10 aspect ratio)

10,600 lm (dual lamp, high mode)

90 %

10,000:1 (full on/full off, in dynamic iris 3 mode)

1,920 × 1,200 pixels

SD-SDI signal: 480i, 576i (SMPTE 259M compliant)

Single-link HD-SDI signal: 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p,

1080/24p, 1080/24sF, 1080/30p (SMPTE 292M compliant)

15 kHz–100 kHz, f

24 Hz–120 Hz, dot clock 162 MHz or lower

15.75 kHz, f

60 Hz [525i (480i)]

15.63 kHz, f

50 Hz [625i (576i)]

31.50 kHz, f

60 Hz [525p (480p)]

31.25 kHz, f

50 Hz [625p (576p)]

15.75/15.63 kHz, f

50/60 Hz [NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM]

±55% from centre of screen (powered)

(±44% with the ET-D75LE6)

±20% from centre of screen (powered)

(±15% with the ET-D75LE6)

Vertical: ±40° (±22° with the ET-D75LE50, ±28° with the ET-D75LE6)*

Ceiling/floor, front/rear

BNC × 1

SD-SDI signal (YC

4:2:2 10-bit): SMPTE 259M compliant: 480i, 576i

Single-link HD-SDI signal (YP

4:2:2 10-bit): SMPTE 292M compliant: 720/50p,

720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p

HDMI 19-pin × 1 (Deep Colour, compatible with HDCP, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p,

1080/30p, 1080/60p, 1080/50p (non-interlaced signals only), VGA (640 × 480) – WUXGA*

DVI-D 24-pin × 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only,

480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,

VGA (640 × 480) –WUXGA*

(1,920 × 1,200), compatible with non-interlaced signals only, dot clock: 25 –162 MHz

BNC × 5 (RGB/YP

/YC

× 1)

D-Sub HD 15-pin (female) × 1 (RGB/YP

BNC × 1 (composite video)

Mini DIN 4-pin × 1 (S-Video)

D-sub 9-pin (female) × 1 (for external control, RS-232C compliant)

D-sub 9-pin (male) × 1 (for link control, RS-232C compliant)

M3 jack × 1 (for wired remote control)

M3 jack × 1 (for link control)

D-sub 9-pin (female) × 1 (for external control, contact control)

RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)

Moulded plastic

530 × 200 × 548.5 mm (20-7/8 × 7-7/8 × 21-19/32 in) (with legs at shortest position, optional lens not included)

Approximately 24 kg (52.9 lb) (optional lens not included)

Operating temperature: 0°C–45°C (32°F–113°F)*

Power cord with security lock, wireless/wired remote control unit, batteries for remote control (R6/LR6 type × 2), safety wire rope

PT- D S 10 0 X E

220–240 V AC, 4.8 A, 50/60 Hz

900 W (950 VA at 240 V)

(0.3 W with

set to

STANDBY MODE

Both with fan stopped.)

24.1 mm (0.95 in) diagonal (4:3 aspect ratio)

DLP

chip × 3 (R, G, B), DLP

™

1,470,000 (1,400 × 1,050) × 3,

total of 4,410,000 pixels

1.78 –15.24 m (70–600 in)*

1,400 × 1,050 pixels

(Input signals that exceed this resolution will

be converted to 1,400 × 1,050 pixels.)

45.00 kHz, f

60 Hz [750 (720)/60p]

37.50 kHz, f

50 Hz [750 (720)/50p]

33.75 kHz, f

60 Hz [1035/60i]

33.75 kHz, f

60 Hz [1125 (1080)/60i]

±50% from centre of screen (powered)

(±40% with the ET-D75LE6)

±30% from centre of screen (powered)

(±20% with the ET-D75LE6)

, horizontal: ±15° (±10° with the ET-D75LE6)*

/YC

× 1)

, operating humidity: 10%–80% (no condensation)

set to

S T A N D B Y M O D E

(32°F) and 35°C (95°F). Also make sure the projector's intake and exhaust openings are not blocked. Take particular

care to ensure that hot air from the exhaust openings is not sucked into the intake.

4. If the projector is to be operated continuously 24 hours a day, use the multi-lamp optical system's alternating lamp opera-

tion (lamp changer) function. The projector can be operated continuously 24 hours a day in four-lamp operation mode, but it

will automatically operate with three lamps for 8 hours of the 24 hours.

5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.

• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp

characteristics and usage conditions.

• The brightness of the lamp will gradually decrease with use.

6. Because the ET-D75LE50 is a fixed short-throw lens, the lens shift function cannot be used with it.

7. Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an indication of faulty lamp per-

formance.

P T- D W9 0 X E

. *

8 W with

set to

ECO

STANDBY MODE

NORMAL

21.6 mm (0.85 in) diagonal (16:9 aspect ratio)

projection system

DLP

chip × 3 (R, G, B), DLP

™

1,049,088 (1,366 × 768) × 3,

total of 3,147,264 pixels

(4:3 aspect ratio)

1.78–15.24 m (70–600 in)*

9,600 lm (dual lamp, high mode)

1,366 × 768 pixels

(Input signals that exceed this resolution will

be converted to 1,366 × 768 pixels.)

–

28.13 kHz, f

50 Hz [1125 (1080)/50i]

28.13 kHz, f

25 Hz [1080/25p]

27.00 kHz, f

24 Hz [1080/24p]

27.00 kHz, f

48 Hz [1080/24sF]

±70% from centre of screen (powered)

(±60% with the ET-D75LE6)

±30% from centre of screen (powered)

(±20% with the ET-D75LE6)

–

(1,920 × 1,200), dot clock: 25 –162 MHz

. When the

is set to

E C O

S T A N D B Y M O D E

E C O

For more information about Panasonic projectors

http://panasonic.net/avc/projector

JQA-QMA14392

Factories of Business Solutions Business Group have received ISO

14001:2004—the Environmental Management System certification

(except for third parties' peripherals).

All information included here is valid as of June 2012.

projection system

™

(16:9 aspect ratio)

33.75 kHz, f

30 Hz [1080/30p]

67.50 kHz, f

60 Hz [1080/60p]

56.25 kHz, f

50 Hz [1080/50p]

, network functions such as power on

EC98J2010

051

PT-DZ110XE2 Printed in Japan.