Panasonic WEMV180A - VIDEO IMAGER Manuale di servizio - Pagina 16
Sfoglia online o scarica il pdf Manuale di servizio per Proiettore Panasonic WEMV180A - VIDEO IMAGER. Panasonic WEMV180A - VIDEO IMAGER 36. Video imager
Anche per Panasonic WEMV180A - VIDEO IMAGER: Manuale di istruzioni per l'uso (35 pagine), Manuale di istruzioni per l'uso (35 pagine)
Stampa la pagina
8
Remove three hexagon nuts and washers that secure the
Back Light Cover and remove the Back Light Cover and
Back Light (Fluorescent Lamp).
Inverter Board
Remove three hexagon nuts.
8
Mount the new Fluorescent Lamp.
8
Mount the Back Light Cover.
8
Insert three washers, and tighten three hexagon nuts to
secure the Back Light.
8
Insert two Spacers then insert the Inverter Board.
8
Insert two washers, and tighten two hexagon nuts to
secure the Inverter Board.
Arm Light
8
Referring to Fig. 6-2, turn the Fluorescent Lamp quarter
and remove the Fluorescent Lamp.
Note : Use specified Fluorescent Lamps.
8
Referring to Fig. 6-3, remove three screws that secure the
Arm Light Cover and pull-out the Arm Light Cover while
pressing the top of the Arm Light Cover.
Disconnect one connector.
Remove two
hexagon nuts.
Back Light Cover
and Back Light
Fig. 6-1
Fig. 6-2
Remove three screws, pull-out while pressing
the top of the Arm Light Cover.
LCD Monitor Ass'y
1. Back Light (Fluorescent Lamp)
8
Referring to Fig. 6-4, remove four screws that secure the
LCD Rear Cover and remove the LCD Rear Cover.
LCD Rear Cover
8
Referring to Fig. 6-5, de-solder both ends of the Back
Light and two Thermal Fuses, then remove two Thermal
Fuses and the Back Light through the Reflector.
Reflector
Thermal Fuse
8
Insert new Back Light through the Reflector and two
Thermal Fuses and then solder both ends and Thermal
Fuse.
2. LCD Monitor Ass'y
8
Referring to Fig. 6-6, remove one screw that secure the
LCD Monitor Mounting Bracket and remove the LCD
Monitor Mounting Bracket.
13
Fig. 6-3
Remove four screws.
Fig. 6-4
Back Light
Fig. 6-5
Thermal Fuse