Panasonic SA-AK48 Manuale di istruzioni per l'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Impianto stereo Panasonic SA-AK48. Panasonic SA-AK48 32. Cd stereo system model no. sc-ak48
Anche per Panasonic SA-AK48: Manuale di istruzioni per l'uso (33 pagine)

Panasonic SA-AK48 Manuale di istruzioni per l'uso
1
T
F M A N
(
2
A M A N
L O O P
E X T
3
4
Appliance inlet
Approx. 6 mm
6
RQT5321
1
2
3
4
Adhesive tape
)
FM indoor antenna
T
AM loop antenna
Grey (+)
Blue (+)
Red (+)
Black (–)

Connections

Basic connections (for supplied accessories)

Plug the AC mains lead into a household mains socket only after
all other connections have been made.
To prepare the AM loop antenna wires and speaker cords, twist
the vinyl cover tip and pull off.
Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where radio
signals are received with the least amount of interference.
Note
For best reception sound quality:
To household
mains socket
An FM outdoor antenna is recommended. (See page 7.)
Connect the AM loop antenna.
After attaching the antenna, turn on the system and tune in a
broadcast station. Then, turn the antenna to the angle of best
reception and least interference.
Connect the speaker cables.
Connect each end of the speaker cables to the terminal lever of
the same colour.
Caution
Use only the supplied speakers.
The combination of the main unit and speakers provide the
best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.
To prevent damage to circuitry, never short-circuit positive (+)
and negative (–) speaker wires.
Caution
Connect the AC mains lead.
(FOR UNITED KINGDOM ONLY)
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 4 BEFORE CONNECTION.
Insertion of connector
Even when the connector is perfectly inserted, depending on
the type of inlet used, the front part of the connector may jut out
as shown in the drawing.
However there is no problem using the unit.
Note
The included AC mains lead is for use with this unit only. Do
not use it with other equipment.
Connector
Use the speakers only with the recommended
system.
Failure to do so may lead to damage to the
amplifier and/or the speakers, and may result in
the risk of fire.
Consult a qualified service person if damage has
occurred or if you experience a sudden change
in performance.
Do not attach these speakers to walls or ceilings.