Panasonic SA-EN27 Manuale di istruzioni per l'uso - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Impianto stereo Panasonic SA-EN27. Panasonic SA-EN27 9. Cd stereo system
Anche per Panasonic SA-EN27: Manuale di istruzioni per l'uso (9 pagine), Manuale di istruzioni per l'uso (9 pagine)
Radio operations
Radio stations can be tuned manually by selecting the station's frequency or they can be preset into channels to make it easy to tune.
You can preset up to 20 FM channels and up to 12 AM channels.
Allocation settings
Each country allocates broadcast bands according to their particular system.
You can change the FM step. The step is factory-set to 0.2 MHz, but you
can change it to receive broadcasts allocated 0.1-MHz steps.
Any FM frequencies preset in channels will be changed by this procedure.
Preset them again.
1. Select the AM band with [TUNER/BAND].
2. Press and hold [TUNER/BAND] on the unit.
After a few seconds the display changes to show the current minimum
frequency. Continue to hold the button down. The minimum frequency
changes and the step is changed.
To return to the original step, repeat the above steps.
Note
The preset memory will be initialized when you change the frequency step.
To improve reception
FM
Receive the radio stations after
connecting the antenna. Then
attach the antenna code on the wall
or pillar in the good reception.
If noise is excessive in FM
You can improve FM reception by switching reception to monaural.
Press to turn the MONO
mode ON/OFF
Main unit
Manual
tuning
Select "FM" or "AM"
Remote control
TUNER/
BAND
Select "FM" or "AM"
To adjust the volume
0
(Minimum)
AM
Change the direction and location
of the antenna.
MONO
MONO
Select the frequency
3
4
u
i
Select the frequency
DISPLAY
SLEEP
1
CLOCK/
TIMER ADJ
4
TIMER
SET/CHECK
7
PGM/CLEAR
-AUTO PRESET
MUSIC PORT
50
TUNER/
(Maximum)
BAND
VOL
SOUND
LIVE
EQ
VIRTUALIZER
ALBUM
Main unit
Auto
tuning
Select "FM" or "AM"
Remote control
TUNER/
Select "FM" or "AM"
• Auto tuning stops when it fi nds a station.
• To cancel auto tuning press the same button again.
Note
• Auto tuning may not function when there is
excessive interference.
Perform once for FM stations and once for AM stations.
Automatic
TUNER/
BAND
presetting
Select "FM" or "AM"
The tuner
presets the
Note
stations it can
During automatic presetting, the memory indicator
receive into
(
) fl ashes and the frequency scrolls. The memory
PGM
channels in
indicator and channel numbers are displayed for a
second when a station is preset.
ascending order.
The fi rst station to be preset is displayed when
presetting fi nishes.
Manual
Tune to the
signal you
presetting
want to
Preset the
set as the
stations one at a
preset.
time.
Note
The station occupying a channel is erased if another
station is preset over that channel.
Selecting
channels
Select "FM" or "AM"
Select "FM" or "AM"
4
OPEN/
CLOSE
2
3
5
6
Input using the numbered
buttons
8
9
To select a 2-digit number
0
>
10
=
e.g. 11: [ 10] → [1] → [1]
CD
To adjust the volume
VOL
SC-EN27
SC-EN25/SC-EN26
PLAY
MODE
ALBUM
u
i
PRESET TUNE
Press and hold until the
frequency starts changing
rapidly
3
4
BAND
u
i
Press and hold until the
frequency starts changing
rapidly
Press and hold until
"AUTO" appears
Within 10 seconds
1
2
3
4
5
6
7
8
9
0
>
=
Enter preset mode
Select a channel
PGM
PGM
SC-EN27
SC-EN25/SC-EN26
Select a channel
Select a channel
10