Panasonic SCPM71SD - MINI HES W/CD PLAYER Manuale di istruzioni per l'uso - Pagina 22
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Impianto stereo Panasonic SCPM71SD - MINI HES W/CD PLAYER. Panasonic SCPM71SD - MINI HES W/CD PLAYER 44. Sistema estéreo de sd
Anche per Panasonic SCPM71SD - MINI HES W/CD PLAYER: Manuale di istruzioni per l'uso (44 pagine), (Inglese) Istruzioni per l'uso (12 pagine)
Stampa la pagina
The radio
Preset tuning
Preset channels to make selection simpler. Up to 15 stations can each be preset in the FM and AM bands.
Automatic presetting
1
Tune to the frequency where presetting is to begin.
(⇒ see above)
2
Press and hold.
• "AUTO MEMORY" starts flashing.
• The tuner presets the stations it can receive into the channels in
ascending order. When finished, "SET OK" appears and the last
station to be preset is played.
22
Manual tuning
1
Select "FM" or "AM".
FM
2
Select "MANUAL".
MANUAL
3
Select the frequency of the desired
station.
4
Adjust the volume.
• Press and hold [u 2/REW] or [i 1/FF] until the
frequency starts scrolling to start automatic tuning.
Tuning stops when a station is found.
• "STEREO" is displayed when a stereo FM broadcast
is being received.
n If noise is excessive in FM
Press and hold [PLAY MODE, –REPEAT] to display
"MONO".
To cancel, press and hold [PLAY MODE, –REPEAT]
again. The mode also cancels when you change the
frequency.
n FM frequency step (main unit only)
AM
AUX
You can change the frequency step (0.2 MHz or
0.1 MHz).
1. Select "FM".
2. Press and hold [TUNER/AUX] on the main unit.
After a few seconds, "FM" starts flashing on the dis-
play. Continue to hold the button down. The mini-
mum frequency changes and the step is changed.
PRESET
• To return to the original step, repeat the above
steps.
• Any preset stations are cleared by this procedure.
Preset them again.
n AM frequency step (main unit only)
For Australia and N.Z.
You can change the frequency step (9 kHz or 10 kHz).
1. Select "AM".
2. Press and hold [TUNER/AUX] on the main unit.
After a few seconds, "AM" starts flashing on the dis-
play. Continue to hold the button down. The mini-
mum frequency changes and the step is changed.
• To return to the original step, repeat the above
steps.
• Any preset stations are cleared by this procedure.
Preset them again.
n RDS broadcasting
The unit can display the text data transmitted by the
radio data system (RDS) available in some areas.
Displaying the text data, the name of a
broadcasting station and a program type.
Note
RDS displays may not be available if reception is poor.
Manual presetting
1
Tune to the desired station.
2
Press.
"PGM" appears.
3
Within 10 seconds:
Select the channel.
The station occupying a channel is erased if another station is preset
in that channel.
Selecting channels
1
Press [TUNER/AUX] to select "FM" or "AM".
2
Press [PLAY MODE, –REPEAT] to select "PRESET".
3
Press the numbered buttons or [u2/REW] or [i1/FF] to select
the channel.
For Canada
Only for Europe
(⇒ see above)