Biometra 042-600 Manuale - Pagina 6

Sfoglia online o scarica il pdf Manuale per Apparecchiature di laboratorio Biometra 042-600. Biometra 042-600 14. Mini rocking, mini-tumbling table

5.0 Installation in the Laboratory

Use the supplied power cable to connect the mixer/shaker to the mains supply.

The appliance connector socket is at the rear.

The mixer/shaker is protected by bipolar fuses. The fuses are located in the housing of the

appliance connector socket and can be reached from the outside. The fuse rating is printed on

the plate.

For a description of how to operate your mixer/shaker, turn to the section "7.0 Operating the

mixers/shakers" and look up your particular model variant.

When working with low shaking frequencies, you can place flat vessels, e.g. Petri dishes, on

the platform without an additional fixture.

This mixer/shaker is fitted as standard with a EURO plug (DIN 49441 CEE 7/VII 10/16 A

250 V). For North America it comes with a US standard plug (NEMA Pub. No. WDI-1961

ASA C 73.1 - 1951 page 8 15A 125 V).

To connect the mixer/shaker to a different mains system, you must use an authorized adapter

or you must have an electrician replace the supplied plug with a suitable 3-pin plug

authorized for your mains system. In its delivered condition the mixer/shaker is earthed! If

you replace the original plug, make sure that the protective earth conductor of your

mixer/shaker is connected to the new plug.

Note the following colour codes if you ever use a different power cable or make any changes

to the power cable supplied:

GREEN/YELLOW = protective earth conductor (PE)

BLUE

BROWN

IN THE UNITED KINGDOM IT IS COMPULSORY TO USE AN APPROVED

STANDARD 13 A PLUG IN CONFORMANCE WITH BS 1363 (3-PIN PLUG).

= phase (N)

= phase (L)