EasyPet EP-28A Manuale d'uso - Pagina 4
Sfoglia online o scarica il pdf Manuale d'uso per Prodotto per la cura degli animali domestici EasyPet EP-28A. EasyPet EP-28A 9. Automatic anti-bark collar
Stampa la pagina
When the charging is complete, the collar unit will be turned on automatically once the charger
pin is unplugged from it.
2.1 Turning on the collar: To turn the collar unit on from OFF mode, press and hold down the
power button for three seconds, the collar unit will vibrate twice quickly with a green light
flashing once.
2.2 Turning off the collar: To turn the collar unit off from ON mode, press and hold down the
power button for three seconds, the collar unit will vibrate twice quickly with a red light flashing
once.
2.3 To preserve the battery life of the collar, always turn the collar off when not in use.
Step 3 Testing the collar
To test the collar manually and see if it can get triggered properly, simply hold the collar unit
with one hand and tap both of the metal prongs with finger tips rapidly. The collar will start to
beep, vibrate, and give electric shock correction (shock correction mode enabled) when it's
triggered continuously.
Step 4 Choose the proper working mode for your dog
There are two working modes on the collar.
The first mode is shock correction enabled mode. In this mode, the collar will gradually give
beep, vibration and 18 levels of shock correction unit the dog stops barking.
The second mode is with pure vibration correction mode, the collar unit will only give beep and
vibration correction to the dog to stop barking.
4.1 Shock correction enabled mode
By default, the collar unit is in shock correction enabled mode. When the collar unit is on, the
indicator light will flash RED once every 6 seconds to indicate the collar unit is in shock
correction enabled mode. To change the collar into shock correction enable mode from pure
vibration mode, simply press the power button quickly for three times.
4.2 Pure vibration correction mode
To change the collar to work in pure vibration correction mode, simply press the power button
quickly for three times, the indicator light should start flashing GREEN once every 6 seconds.
Triggering Corrections in Different Working Modes