Axis 240Q Blade Manuale di installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di installazione per Telecamera di sicurezza Axis 240Q Blade. Axis 240Q Blade 9. Video server
Anche per Axis 240Q Blade: Specifiche tecniche (6 pagine), Specifiche tecniche (2 pagine), Specifiche tecniche (2 pagine), Scheda tecnica (2 pagine), Scheda tecnica (2 pagine)

AXIS 240Q Blade - Rack Solution Installation Guide

Video In

The AXIS 240Q accommodates up to 4 separate video sources (VIDEO 1 - VIDEO 4)

simultaneously. Each supported video input is terminated using a coax/BNC connector.

Physical connections made using 75 Ohm coaxial video cable have a recommended

maximum length of 800 feet (250 meters).

Product Label

The S/N (serial number) is identical to the unit's MAC address,

e.g. 00408C1A2B3C = 00-40-8C-1A-2B-3C.

P/N (part number) is the product model number.

Physical interface to the I/O Block Connector on the rack

Each video input has a corresponding line

termination DIP switch.

• The AXIS 240Q is supplied with the line termination

enabled for each video input; that is, with the DIP

switches set to ON (down position).

• If the video signal is to be connected in parallel with

other equipment, disable the input termination for

that video source by setting the corresponding DIP

switch to OFF (up position). Failure to do so can

impair the picture quality.

DIP switches

Bus

Connector