dibea R701 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Aspirapolvere dibea R701. dibea R701 12. Robotic vacuum cleaner

Stampa la pagina
dibea R701 Manuale d'uso
Product Operation
Product Operation
Product Operation
Product Operation
Note:
The scheduled time of scheduling by robot panel is based on the robot clock.
For example, if you set 9:00 to be the scheduling time, the robot will start cleaning every 9:00
(robot clock). So you should set the robot clock first before scheduling.
Once the robot is scheduled, it will start cleaning automatically at the scheduled time everyday.
2. Scheduling by remote control
A. Scheduling time setting
Make sure the robot is in standby/ charging mode, long press
and go into the scheduling mode.
Press PLAN button until the remote displays flashed figure "00:00"
After scheduling time is setted, use remote control press"On/Off" button, display panel
show the scheduling time.
Note: When scheduling, the figures displayed on the screen is the delayed time. For example,
02:30 on the screen means the robot will start working 2 and a half hours later from now on.(The
"00" means hour while the right one means minute.) Once the time is scheduled, the robot will
always work according to the setting everyday.
B. Cancel scheduling
Press ON/OFF again, scheduled setting will be cancelled.
( If the robot shows 00:00 on panel, then the scheduling is cancelled. If not, press ON/ OFF again).
Switching suction and rolling brush
Switching suction and rolling brush
Switching suction and rolling brush
Switching suction and rolling brush
Suction and rolling brush can be switched on the botton of robot as picture below:
bottom cover
wheel
charging socket
on the remote control,
suction assy
rolling brush
wheel
side brush
battery cover
nose wheel
charging pole
side brush
Product Operation
Product Operation
Product Operation
Product Operation

4 cleaning modes:

1. Random cleaning mode
In random cleaning mode, robot will cleaning straightly,
and will turn direction randomly when meet obstacles,
just in order to clean effeciently.
2. Spiral Cleaning
.
In spiral cleaning mode, robot will clean in a spiral
pattern. It is suitable for an open area.
3. Edge cleaning
In cleaning mode, press MODE to choose edge
cleaning. The robot will clean along the obstacles.
4 .
Zig-Zag cleaning
Zig-Zag cleaning mode is suitable for open area or the
environment with less obstacles.
Random cleaning
Spiral cleaning
Edge cleaning
Zig-Zag cleaning