Axis AXIS 214 Istruzioni per il prodotto - Pagina 8
Sfoglia online o scarica il pdf Istruzioni per il prodotto per Telecamera di sicurezza Axis AXIS 214. Axis AXIS 214 14. Installation kit
Anche per Axis AXIS 214: Istruzioni per l'uso (2 pagine)
Stampa la paginaInstalling Axis 231D/232D Camera
7. Then start (3) 8-32x3/8" phillips head screws onto the (3) ½" spacers inside
the housing. Be sure to place the screws so that they line up with the (3)
open slots on the quick release bracket, the screws on the bottom of the
camera, see diagram below.
(3) 8-32 x 3/8"screws
8. Locate the connector block,
which is included with the
camera. Then located the
connector block bracket,
which is included with the
housing. Attach the block
to the bracket as shown
in the following diagram.
Use the M3 screws
and washers that are
located in the housing
packet.
9. Attach the connector
block assembly to the
housing using (1) 6-
32x3/8" screw and star
washer located in the
housing packet.
(cont.)
10. Make wiring connections to connector block assembly per
camera instructions.
Wiring Connections
POWER
1
Camera Power (24VAC)
2
Camera Power (24VAC)
CONTROL
RJ45 Ethernet Connector
ALARMS
1
Alarm 1
2
Alarm 2
3
Alarm 3
4
Common
- -
Red
Orange
Blue
Violet
Gray
White