EasyRest PREMIER Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Telecomando EasyRest PREMIER. EasyRest PREMIER 2. Wireless
Anche per EasyRest PREMIER: Manuale di avvio rapido (2 pagine)

Stampa la pagina

Other features:

Matching the RF (Radio Frequency) handset to the receiver:

The receiver has the capability to accept commands from as many as 2 different RF handsets. The handsets must be matched in the

receivers learning mode.

If the head or foot bed portions are not in the fully down position before the reset button is activated, then the learning mode

cannot be activated and the button will perform an ordinary FLAT function instead.

After the FLAT function is complete, the reset button must be released and reactivated.

Activating the learning mode:

Learning mode is activated by pressing one of two available reset buttons illustrated below:

Reset button on external switch

pressing the reset button on the motor unit by using a pen or similar object to keep the button pressed.

activate a button on each handset while continually holding the reset button. If the reset button is released before the 2nd handset is

matched, only the ﬁrst handset will be active.

Additional information:

the system, but might prevent it from running depending on the signal strength of the noise signal.

Reset button on motor unit

reset.