Alpha Digital LD353 Manuale d'uso - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso per DVR Alpha Digital LD353. Alpha Digital LD353 17.

Troubleshooting

Under normal operating conditions, such as abnormal products, please refer to

the solution:

Unable to boot:

Check the recorder and car charger connected correctly, if you manually turned

on, check the battery level is too low needs recharging. As a result of procedural

questions by pressing the RESET button to restore to factory settings.

When the camera automatically stops recording, or do not cycle the camera.

Due to the huge high-definition video data, it is possible because the memory

card reader could not keep pace.

Make sure the gravity sensor function is closed, and memory is formatted.

Each time the camera and set the cycle is not the same.

Check to see if motion detection function, because the camera motion detection

state length of time, depending on the screen there is no movement.

Please check whether the stolen camera, finger print.

Please clean the Lens before using the camera. It is important to keep the

lens clean.

Camera effects and lighting conditions will affect the quality of the video.

Images have streaks interference.

This is due to the wrong setting "light frequency" produced under the

fluorescent lights, the domestic flat rate "50Hz".

When the machine briefly press the "RESET" the reset button to restore restart.