Dickson PR320 Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Data Loggers Dickson PR320. Dickson PR320 2. Pressure data loggers

Stampa la pagina

Getting Started

Install DicksonWare version 15.5 on your PC (compatible

with windows 98 or higher)

Install battery

Carefully remove case lid

Remove the battery compartment lid carefully by

twisting cap clockwise.

Insert the battery positive side up.

Replace the battery cap.

It may take up to 5 seconds for the unit to power

up. Open DicksonWare software via the icon on

your desktop.

Connect the USB cable to the logger (port located

to the left Dickson logo) and to an available working

USB port on your PC. Your computer may detect

the logger when it is powered on and connected to

the computer via the USB connection. Depending

Pressure Logger Defaults

Sample Rate = 5 minutes

Stop or Wrap When Full = Wrap

DicksonWare Unit of Measure = PSI

To change any of the logger defaults, connect the logger to

your PC via the USB cable and open DicksonWare. Click on

Setup. The following settings can be modified:

1. Setup/Identification

Logger ID Name logger

Calibration Date Set next calibration date

Calibration Interval Set calibration interval

2. Setup/Samples

Sample Interval: How frequently the logger takes a

pressure reading.

Sub 10 Second Interval Note: Selecting Sub

10 Second Intervals automatically activates

Water Hammer mode with a sample of 1 second.

Stop or Wrap When Full Stops logging when the

logger is full or writes over oldest sample points.

3. Setup/Channels

Name Logger Channel

Set Scale

Set scale is displayed when downloaded to

DicksonWare set via File/Preferences

Telephone: 630.543.3747 • Fax: 630.543.0498 • E-mail: [email protected]

www.DicksonData.com

930 South Westwood Avenue • Addison, IL 60101-4917

Pressure Data Loggers

on your version of Windows, the computer may go

through an Add New Hardware routine. Click on the

Setup button. You will be prompted to select USB or

Serial COM Port Connection. Select USB then click

Continue. A setup window will appear. All fields

should be automatically filled in confirming that

DicksonWare has recognized your logger. Should

all fields remain blank, refer to "no communications

for this model" in the Technical Support section of

www.DicksonData.com.

Once DicksonWare recognizes the logger, press

the Clear button. This will delete all data

currently stored.

Your logger is now ready to be placed in the desired

logger location.

Note: To achieve longer battery life during

operation, use a less frequent sample rate and

disconnect the unit from the USB port when not

downloading data.

Real Time Monitoring

Monitor and graph your process as it happens and

print and save from real time screen. (This feature

should be used sparingly as it causes the battery to

drain very quickly.)

Customize Graphed Data

DicksonWare™ calculates MIN, Max and Average

of all data collected. Customize data by eliminating

unnecessary data points and customize MIN, Max

and Average to show only desired information.

Export Data

A snapshot of your graph or a real-time graph of

points can be easily exported to other programs such

as Excel™ or PowerPoint™.

Click on the FEaTURES button in the software

for detailed instructions on how to use the

features above.

PR120/320

rev. 1/09