Axis 241S Blade Manuale di installazione - Pagina 7

Sfoglia online o scarica il pdf Manuale di installazione per Server Axis 241S Blade. Axis 241S Blade 8. More video servers in less space – quick, flexible and professional installation and service
Anche per Axis 241S Blade: Specifiche tecniche (6 pagine), Opuscolo (2 pagine), Specifiche tecniche (2 pagine), Specifiche tecniche (2 pagine), Specifiche tecniche (2 pagine), Scheda tecnica (2 pagine), Specifiche tecniche (2 pagine), Specifiche tecniche (2 pagine), Manuale d'uso (3 pagine)

Connecting the video server to the rack

3. Now refer to Installing on a Network in the AXIS 241Q/S Video Server User's Manual

supplied with the Axis Blade Video Server, keeping in mind the following details:

• Network - connect the Ethernet cable to the Ethernet connector on the rack, in the

position where the video server is to be connected.

• Power is supplied via the Bus Connector, slide the blade video server into the slot.

Make sure that the bus connector is securely connected to the I/O terminal block

connector at the back of the rack. When repeating the installation procedure for each

individual blade video server, simply disconnect the blade video server from the rack

(i.e. do not disconnect the power cable).

• Secure the video server to the rack using the screws on the front panel. The rack

accommodates up to 12 individual Axis Video Servers. To comply with EMC

regulations, ensure that all empty slots are covered using the supplied cover plates.

AXIS 241Q/S Video Server User's Manual

The functionality of the Axis Blade Video Servers is the same as in the standalone versions.

For more information on how to install and configure your video server rack on your

network, please refer to the relevant sections in the AXIS 241Q/S Video Server User's

Manual available in printed format with your AXIS 241Q/S Video Server or on the Axis

Web site at www.axis.com

AXIS 241Q/S Blade - Rack Solution Installation Guide

Please read through the instructions below before

beginning the installation.

1. Connect the power cable to the power connector

on the rack. Make sure that the green power

indicator is lit.

2. Note the Serial number (S/N) on the front panel

on the video server. You need to know this to set

Power

the IP address.

Indicator