Axis FA54 Manuale d'uso - Pagina 14
Sfoglia online o scarica il pdf Manuale d'uso per Server Axis FA54. Axis FA54 16. Main unit
Anche per Axis FA54: Manuale d'uso (19 pagine), Manuale di installazione (20 pagine)
Stampa la pagina
AXIS FA54 Main Unit
Technical specifications
Network connector
RJ45 Ethernet connector.
Audio connector
The Axis product has the following audio connectors:
•
Audio in – 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
•
Audio out – 3.5 mm output for audio (line level) that can be connected to a public address (PA) system or an active
speaker with a built-in amplifier. A stereo connector must be used for audio out.
3.5 mm audio connectors
(stereo)
Audio Input
Audio Output
I/O connectors
Use the I/O connector with external devices in combination with, for example, tampering alarms, motion detection, event triggering,
and alarm notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:
Digital output - For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX®
Application Programming Interface or in the product's webpage.
Digital input - For connecting devices that can toggle between an open and closed circuit, for example PIR sensors, door/window
contacts, and glass break detectors.
6-pin configurable terminal block
Function
0 V DC (-)
DC output
Configurable
(Input or Output)
1 Tip
Microphone/Line in
Line out (mono)
Pin
Notes
1
DC ground
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
3–6
Digital input – Connect to pin 1 to activate, or leave floating
(unconnected) to deactivate.
Digital output – Connected to pin 1 when activated, floating
(unconnected) when deactivated. If used with an inductive load, e.g.
a relay, a diode must be connected in parallel with the load, for
protection against voltage transients.
2 Ring
14
3 Sleeve
Ground
Ground
Specifications
0 V DC
12 V DC
Max load = 50 mA
0 to max 30 V DC
0 to max 30 V DC, open drain,
100 mA