Alpha Outback Energy CableUPS XM3V-HP Manuale di avvio rapido - Pagina 3
Sfoglia online o scarica il pdf Manuale di avvio rapido per UPS Alpha Outback Energy CableUPS XM3V-HP. Alpha Outback Energy CableUPS XM3V-HP 7.
Stampa la pagina2. Battery Cable Kits and Connections
Battery Cable Kit, Precision Temperature Sensor / Smart AlphaGuard or Battery Sense Harness, and Battery Fastener Stack-up
11
Smart AlphaGuard (Embedded) — use Battery Harness, p/n:
NOTE:
The compatibility of the XM3V SAG system with certain vaults is dictated by the length of the SAG harness. Contact
your local sales representative for more information.
8.1
36V Single and Dual Strings
DSM3 (1 battery string) — use Battery Sense Harness, p/n 874-842-21 (Not required if Smart AlphaGuard is installed with its sense harness).
Communications Module Battery Sense Wire Kits are required for individual battery voltage
monitoring when the XM3 SAG option is not installed. For XM3 power supplies with the SAG option,
DSM3 (2 battery strings) — use Battery Sense Harness, p/n 874-842-28 (Not required if Smart AlphaGuard is installed with its sense harness).
��������������������������������
DSM3x (3 battery strings) — use Battery Sense Harnesses, p/n 874-842-21 and 874-842-28 (Not required if Smart AlphaGuard is
existing Communications Module Battery Sense Wire Kits. Otherwise, a SAG "No Harness" alarm will
NEG
NEG
(-)
be generated if the Battery Sense Wire Kits are connected to the Communications Module battery
DSM3x (4 battery strings) — use Battery Sense Harness, p/n 874-842-20 and 874-842-28 (Not required if Smart AlphaGuard is installed
connections (A/B or C/D) instead of the SAG connector.
2A
1A
To Power Supply
Black
Red
POS
POS
(+)
NEG
(-)
3A
POS
(+)
For more Battery Sense Harness wiring information see DSM3 Series DOCSIS Status Monitor
To Power Supply
for XM3 Technical Manual (Alpha p/n 745-814-B11-001), section 8.1.
Black
Red
Threaded Insert Terminals
CAUTION!
NEG
(-)
Use battery manufacturer specified bolts for threaded insert terminals. Failure to do so may damage the battery
terminal.
3A
Torque all nuts and bolts to 12.43N-m or to the battery manufacturer's specifications.
(-)
(-)
NEG
NEG
POS
(+)
2A
1A
M6 x 19mm Bolt
(+)
(+)
POS
POS
Split Washer
Flat Washer
Battery Sense Cable
NEG
or RTS
3B
Battery Cable
Battery Terminal
POS
875-848-30 for one string, 1.9M (36V)
875-848-31 for two strings, 1.9M (36V)
875-848-34 for one string, 3.5M (36V))
875-848-36 for one string, 1.9M (24V)
875-848-37 for two strings, 1.9M (24V)
875-848-38 for one string, 3.5M (24V)
Fig. 8-1, 36V System, Single String
Sense Wire Kits:
installed with its sense harness).
(-)
with its sense harness).
Alpha P/N: 874-842-21 (6')
Alpha P/N: 874-842-27 (9')
(+)
NEG
NEG
(-)
(-)
2A
1A
POS
POS
(+)
(+)
Fig. 8-2, 36V System, Dual String
Sense Wire Kits:
Fig. 8-2, 36V System, Dual String
Alpha P/N: 874-842-20 (6')
NEG
(-)
NEG
(-)
Alpha P/N: 874-842-28 (9')
Sense Wire Kits:
2A
1A
Alpha P/N: 874-842-20 (6')
POS
(+)
POS
(+)
Alpha P/N: 874-842-28 (9')
NEG
NEG
2B
1B
POS
POS
dapter kits to accommodate any
dapter kits to accommodate any
Fig. 8-1, 36V System, Single String
Sense Wire Kits:
Alpha P/N: 874-842-21 (6')
6
Alpha P/N: 874-842-27 (9')
4
8
3
7
4
8
2
6
3
7
2
6
1
5
1
5
Back of Pl
Back of Pl
ug
Nut
4
8
Split Washer
3
7
Flat Washer
2
6
1
5
Battery
Back of Plug
Cable
In-Line Fuse Link
Flat Washer
4
8
M6 x 25.4mm or
19mm Bolt
3
7
2
6
1
5
Back of Plug
745-814-B11-001, Rev. B1 (05/2013)
3
ug
Precision Temperature Sensor (PTS), 746-331-30 (1.2M)
or 746-331-31 (2.5M)
Fuse
M6 x 25.4mm
Bolt
Split Washer
Flat Washer
Spacer
Battery
Terminal