Epever GM3024N Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Caricabatterie Epever GM3024N. Epever GM3024N 20. Flush mount solar charger

Step2: Connect the PV ❷

CAUTION: While wiring the controller do not turn on the breaker or fuse and

make sure that the leads of "+" and "-" poles are connected correctly.

CAUTION: If the controller is used in the ungoverned or frequent lightning

area, must install a reasonable arrester in the PV array input side.

Step3: Connect the Remote temperature sensor cable ❸

NOTE: The controller will charge or discharge the battery at 25℃ as default

and no temperature compensation when the temperature sensor is damaged.

Step4:Connect the Remote battery voltage sensor ❹

CAUTION: Make sure that the battery voltage sensor cable of "+" and "-"

poles are connected correctly when wiring.

Step5: Connect the PC via the RS485 communication port ❺

Refer to the chapter 4 "Remote set battery type".

BEIJING EPSOLAR TECHNOLOGY CO.,LTD.