EPH Controls R37-RF Istruzioni per l'uso - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per l'uso per Scheda madre EPH Controls R37-RF. EPH Controls R37-RF 2. 3 zone rf programmer
Anche per EPH Controls R37-RF: Istruzioni per l'uso (2 pagine)
R37-RF -3 Zone RF Programmer
9. Advance function
This function allows the user to bring forward the next switching time.
If the zone is currently timed to be OFF and the ADV is pressed, the zone will
be switched ON until the end of the next switching time.
If the zone is currently timed to be ON and the ADV is pressed, the zone will
be switched OFF until the end of the next switching time.
ZONE
ZONE
Press
for Zone 1,
1
2
ADV.
ADV.
To cancel the ADVANCE function, simply press the respective ADV
button again.
10. Holiday mode
Lower the cover on the front of the unit.
Move the selector switch to the RUN position.
Press the
button.
Holiday
The current date and time will ash on the screen. It is now
possible to enter the date and the time when you plan to return.
Press the
or
buttons to select the day.
Press the
or
buttons to select the month.
Press the
or
buttons to select the year.
Press the
or
buttons to select the hour.
To activate Holiday mode press the
To cancel Holiday mode press the
Otherwise Holiday mode will deactivate on the time and date entered.
11. Connect the RF thermostat with the programmer
On the programmer
Lower the front cover and move the selector switch to
the RUN position. Press the
Wireless Connect will appear on the screen.
On the RFR wireless room thermostat or RFC wireless cylinder thermostat
Press the Code button. This is located inside the housing on the PCB.
On the programmer
Zone 1 will begin to ash. Press the
button for the zone you wish to connect the thermostat to.
The wireless symbol
appears on the screen.
The thermostat will count upwards to the number of the zone that it is paired
with. When it reaches the number of the zone that it is paired with press the
handwheel on the thermostat.
The programmer is now operating in the wireless mode. The temperature of
the wireless thermostat is now displayed on the programmer.
Repeat this process for the second and third zone if required.
12. Disconnect the RF thermostat from the programmer
On the programmer
Lower the front cover and move the selector switch to
the RUN position.
Press the
button for 5 seconds.
Wireless Connect will appear on the screen.
Press the
button for 3 seconds. This will clear all RF connections
thereby disconnecting all thermostats from the timeswitch.
Press the
button.
ZONE
for Zone 2 or
for Zone 3.
3
ADV.
RUN
CLOCK
SET
Press
Holiday
Press
Holiday
Press
Holiday
Press
Holiday
button.
button again.
CLOCK
SET
button for 5 seconds.
,
or
CLOCK
SET
EPH Controls Ireland
[email protected] www.ephcontrols.com
13. Backlight mode selection
There are two settings for selection. The factory default setting is ON.
ON
The backlight is permanently ON.
AUTO
On pressing any button the backlight stays on for 10 seconds.
To adjust the backlight setting
Lower the cover on the front of the unit.
Move the selector switch to the RUN position.
Press the
Press either the
Press the
14. Keypad lock and unlock
PROG
To lock the keypad, press and hold the
SET
will appear on the screen. The keypad is now locked.
To unlock the keypad, press and hold the
seconds.
15. Copy function
Copy function may only be used if the programmer is in the 7d mode.
Lower the cover on the front of the programmer.
Move the selector switch to the PROG SET position.
First, program one of the days of the week with a schedule you wish to copy
to other days.
While still on that day press and hold the
This will take you into the Copy screen.
The day of the week that is to be copied is shown and the day it is to be
copied to is ashing.
Press the
RUN
PROG
Press the
SET
Continue in this fashion by pressing the
the day ashing and by pressing the
When you are nished press the
Move the selector switch to the RUN position.
16. Frost protection function
3
Selectable range 5~20°C. This function is set to protect pipes against
freezing or to prevent low room temperature when the programmer is
programmed to be OFF or is manually OFF.
Frost protection can be activated by following the procedure below.
Move the selector switch to the RUN position.
Press both the
enter selection mode.
Press either the
O frost protection.
Press
Press either the
the desired frost protection setpoint. Press
All zones will be switched ON in the event of room
RUN
temperature falling below the frost protection setpoint.
PROG
SET
17. Master reset
Lower the cover on the front of the programmer. There are four hinges
holding the cover in place. Between the 3rd and 4th hinges there is a
circular hole. Insert a ball point pen or similar object to master reset the
programmer.
After pressing the master reset button, the date and time will now need
to be reprogrammed.
EPH Controls UK
[email protected] www.ephcontrols.co.uk
Page 2 of 2
Operating Instructions
button for 5 seconds.
buttons to select the ON or AUTO mode.
or
button.
will disappear from the screen. The keypad is now unlocked.
COPY
Holiday
button to copy the schedule to this day.
button to skip this day
button to skip that day.
button
and
buttons for 5 seconds, to
or
buttons to to turn On or turn
button to con rm.
or
buttons to increase or decrease
On
RUN
CLOCK
PROG
SET
SET
Unlocked
and
buttons for 5 seconds.
Holiday
and
buttons for 5
Holiday
RUN
CLOCK
PROG
SET
SET
button for 3 seconds.
button to copy the schedule to
O
RUN
CLOCK
PROG
SET
SET
to select.
20180621_R37-RF-OpIns_JW