Axis M1065-LW Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Fotocamera digitale Axis M1065-LW. Axis M1065-LW 16.

AXIS M1065-LW Network Camera

Setup

7. Click Ok.

How to record video when the camera detects motion

This example explains how to set up the camera to start recording to the SD card five seconds before it detects motion and to

stop one minute after.

Make sure the AXIS Video Motion Detection application is running:

1. Go to Settings > Apps > AXIS Video Motion Detection.

2. Start the application if it is not already running.

3. Make sure you have set up the application according to your needs.

Create an action rule:

4. Go to Settings > System > Events and add an action rule.

5. Type a name for the action rule.

6. From the list of triggers, select Applications and then select AXIS Video Motion Detection (VMD).

7. From the list of actions, select Record video.

8. Select an existing stream profile or create a new one.

9. Set the pre-trigger time to 5 seconds.

10. Set the post-trigger time to 60 seconds.

11. Select SD card from the list of storage options.

12. Click Ok.

Streaming and storage

How to set up network storage

To store recordings on the network, you need to set up network storage:

1. Go to Settings > System > Storage.

2. Click Setup under Network storage.

3. Enter the IP address of the host server.

4. Enter the name of the shared location on the host server.

5. Move the switch if the share requires a login, and enter username and password.

6. Click Connect.

How to add audio to your recording

Edit the stream profile which is used for the recording:

1. Go to Settings > System > Stream profiles.

2. Select the stream profile to modify.

3. In the Audio tab, select the Audio stream checkbox and select On from the drop-down list.