Axis Electronics NANO-200G2 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Bilance Axis Electronics NANO-200G2. Axis Electronics NANO-200G2 17. Electronic weighing scale

press the MODE button, and user can choose whether the scrolling

function is required or not. If the price scrolling function is required

user should select "Yes", and if it is not required then the user should

select "No". Press the ZERO button, to exit this setting. Now the scale

will scroll the rate entered in the price entering function, that is when

the scale is switched on and idle, the display will start scrolling

"today's rate 10 gm 5500"

LED GLOW:

6.3

strength

decreased depending upon the user

requirement. Increasing the GLOW of

the display will effect the Battery back

up time, and the battery life. The

GLOW setting is set to minimum by

Default. If the user wants to increase the GLOW of the display, it can

be done as follows:

In setting mode when display shows "Glow 0" press the MODE button.

On pressing the MODE button, you will notice the GLOW of the display

is increased. If the user wants to keep this setting, simply press the

ENTER button, until the display comes back to the weighing mode. It

is important to note that when the scale is switched off and then

switched on again, the display Glow setting will again be set to GLOW

0 by default.

FILTER SETTING:

6.4

used to set the speed of the display.

When the display shows "FILTER" press 0. Valid values are 0, 1, 2, 3

which can be selected using the mode

button. 0 is the fastest and 3 is the

slowest mode.

The display GLOW

can

increased

This setting is

NANO Series Precision Balance