Acculaim Dyna Drum HO Manuale d'uso - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di illuminazione Acculaim Dyna Drum HO. Acculaim Dyna Drum HO 20.

Stampa la pagina

Adjusting the user display

You can make adjustments to the user display to suit your installation:

• You can invert the display so that it reads correctly when the fixture is mounted inverted.

• You can blackout the display when it is not in use - it will re-illuminate when you press a

button.

To invert the display

1 Enter the user menu (see page 8).

2 Select the dISP menu item.

3 Use the

view it normally).

4 Press

ENTER

to save.

To blackout the display

1 Enter the user menu (see page 8).

2 Select the Led menu item.

3 Use the

4 Press

ENTER

to save.

Setting a white balance

Note: White balance is only possible on Dyna Drum HO color models.

White balance is useful when your Dyna Drum HO installation will be required to regularly

present particular shades of white using the R, G, B emitters, (plus the white emitters, if

necessary). Using the white balance feature you can 'bias' particular colors so that when the

R, G and B channels are all brought up, your pre-programmed bias will achieve, for example,

a balanced warm white derived from a significant red output, with a moderate green

output, while the blue is scaled back significantly.

White balance works with control from either the external DMX input or when running solo

from the internal menu.

To achieve identical white balance across a collection of fixtures, you will need to program

the same settings on each Dyna Drum HO unit.

To set a white balance

1 Enter the user menu (see page 8).

2 Select the bALA menu item. You now have access to the separate red, Gree and bLue

options, which are all set to 255 by default.

3 Use the

and

4 Use the

and

125 to reduce the intensity of that color, and press

5 Repeat step 4 for each color that needs to be biased to achieve the required balance.

To cancel a white balance

1 Enter the user menu (see page 8).

2 Select the bALA menu item. In turn visit each color and ensure that they are all returned

to 255.

button to change to the inverted mode (it will read as dSIP when you

button to change to the oFF mode.

buttons to choose a color and press

buttons to reduce the chosen color from 255 down to a minimum of

ENTER

to save.