Olympus C-4100 ZOOM Manuale di avvio rapido
Sfoglia online o scarica il pdf Manuale di avvio rapido per Fotocamera digitale Olympus C-4100 ZOOM. Olympus C-4100 ZOOM 2. Olympus digital camera quick start guide
Stampa la pagina
C-4000 ZOOM
DIGITAL CAMERA
Quick-start guide
We've included this convenient Quick-Start Guide to show you basic functions and
techniques that will help you quickly master your new camera. For more detailed
descriptions of procedures, as well as for additional information on more sophisticated
features not covered here, please refer to the printed "Basic Manual", or the primary
"Reference Manual" on the CD-ROM.
Package contents
Camera
Software installation guide (included in
Strap
the CD-ROM package)
Lens cap/String
CD-ROMs with Windows 98 USB driver
CR-V3 lithium battery packs (2 packs)
software, Reference manual, and more.
or AA (R6) alkaline batteries (4 pieces)
Warranty card/Registration card (not
(Provided battery type depends on the
provided in some areas)
area where you purchased this
Safety Precautions (booklet)
camera.)
SmartMedia
Video cable
Static-free case
USB cable
Index labels (2 pieces)
Basic manual
Write-protect adhesive seals (4 pieces)
Quick-start guide
SmartMedia instructions
Attaching the strap
1
4
Thread the end
Strap eyelet
of the strap back
through the ring
and stopper as
indicated by the
2
Loosen the strap
arrows.
in both stoppers.
Pull out the ends
of the strap from
Ring
each stopper,
5
then pull them
Stopper
out of each ring.
3
6
Attach the strap to the other strap
eyelet following steps 3 – 5.
Printed in Japan
1AG6P1P1373 – – A
Viewing still pictures
1
Set the mode dial to
(playback mode).
2
Display the desired pictures using
the arrow pad.
Jumps to the picture 10 frames behind.
Displays the next picture.
Jumps to the picture 10 frames ahead.
Displays the previous picture.
Zoom lever
Turning the zoom lever
towards
Enlarges the picture.
T:
W: Displays multiple
pictures at the same
time.
Press
to avoid
Protect mark
HQ
accidentally erasing
images.
To cancel protection,
press
again.
Loading the batteries
1
Make sure the camera is turned off (i.e. the
mode dial is set to OFF).
2
Slide the battery compartment lock on the
battery compartment cover in the direction of
.
3
Slide the battery compartment cover in the
A
direction of the arrow (
) with your fingertip
and open it (
B
).
● Do not use your fingernail, as this could result in
injury.
4
Insert the batteries in the direction shown in
the illustration.
Battery alignment
When using AA
(R6) batteries
5
Close the battery compartment cover, then
C
press it down (
) and slide it in the opposite
direction of the arrow printed on it (
D
).
● When pressing the battery compartment cover
shut, be sure to press the center of the cover, as
it may be difficult to close properly by pressing
the edge.
● Make sure the cover is completely closed.
6
Slide the battery compartment lock on the
battery compartment cover in the direction of
.
Note:
● Manganese (zinc-carbon) batteries cannot be
used.
VT387102
Recording movies
1
Remove the lens cap and set the mode dial to
● The
factory default setting is
.
To change to the movie mode, first press the
Éí
button. Press
repeatedly until
is selected on
the screen, then press
.
Green lamp
2
Point the camera towards
a subject while viewing
with the monitor.
HQ
320x240
button
Card access lamp
3
Press the shutter button halfway.
● When the subject is in focus, the green lamp blinks once.
4
Press the shutter button all the way to star t
recording.
● During movie recording, the orange lamp next to the
viewfinder is illuminated and
lights in red on the
monitor.
5
Press the shutter button all the way again to stop recording.
● The card access lamp blinks and the camera starts writing the movie to the card.
● If the displayed seconds remaining reach "0", shooting finishes automatically and
the camera starts writing the movie to the card.
Inserting/Removing the memory card
(SmartMedia)
1
Make sure the camera is turned off (i.e. the
mode dial is set to OFF).
2
Open the card cover.
A
B
3
Inserting the card
Insert the card fully with the contact area facing
towards the monitor side. Insert until you feel it
locked into place.
● Hold the card in a straight orientation to the card
slot. Do not attempt to insert the card at an
When using
angle.
CR-V3 lithium
● Note the orientation of the card. If it is inserted
battery packs
incorrectly, it may become jammed.
Removing the card
Push in the card lightly to unlock it, then pull it
C
out.
D
4
Close the cover tightly.
Note:
● Never open the card cover, eject the card, remove the batteries, or disconnect
the optional AC adapter while the camera is in use or the camera is
communicating with a computer. Doing so could destroy all data on the card.
Playing back movies
1
Display the movie frame (picture with
.
steps 1 and 2 in "Viewing still pictures".
MODE
MOVIE
MOVIE
2
Press
.
SELECT
GO
● The top menu appears.
Press
to avoid
AF target mark
accidentally erasing images.
To cancel protection, press
again.
5
Press
to start playback.
● When playback finishes, the screen returns to the beginning of the movie.
Seconds remaining
● If
is pressed again when the movie playback is finished, the MOVIE PLAY-
BACK screen appears. To exit the movie playback mode and return to the
MOVIE PLAY screen, press
Taking still pictures
Program shooting
2
Point the camera towards a
subject while viewing through the
viewfinder.
Card access lamp
3
To focus on the subject, press the shutter button
halfway, slowly and gently.
● When the subject is in focus, the green lamp lights steadily.
4
To start shooting, press the shutter button gently all the way (fully).
● When the orange lamp lights, the flash fires automatically when required.
● The card access lamp blinks and the camera begins storing pictures on the card.
● To turn the camera off, set the mode dial to OFF.
● Before shooting, turn the diopter adjustment dial to see the AF target mark
clearly.
Erasing pictures
Single-Frame Erase
) you want to play back. T See
1
Display the picture you want to erase. T See steps 1 and 2 in "Viewing still
pictures".
2
3
Ñ
Press the
Press
on the arrow pad to
select MOVIE PLAY.
MOVIE PLAY
INFO
MODE MENU
3
When the
4
Ññ
Press
to select MOVIE
● To cancel erasure, press ñ on the arrow pad to
PLAYBACK on the MOVIE PLAY
select NO, and press
screen.
● To exit the MOVIE PLAY screen,
É
press
.
4
Press
MOVIE PLAY
MOVIE PLAYBACK
INDEX
EDIT
CANCEL
SELECT
GO
Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 1-631-844-5000
24/7 online automated help: http://support.olympusamerica.com/
Phone customer support: Tel. 1-888-553-4448 (Toll-free)
OLYMPUS OPTICAL CO. (EUROPA) GMBH.
Premises/Goods delivery: Wendenstrasse 14-18, 20097 Hamburg, Germany
Letters: Postfach 10 49 08, 20034 Hamburg, Germany
Ññ
to select EXIT, then press
.
1
Remove the lens cap and set the mode dial to P.
Green lamp
(erase) button.
Erase button
Ñ
ERASE screen appears, press
to select YES.
ERASE
or the
button.
YES
N O
to erase the picture.
SELECT
GO
OLYMPUS AMERICA INC.
Tel. 040-237730
http://www.olympus.com/