Olympus DP72 Manuale di istruzioni - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per Fotocamera digitale Olympus DP72. Olympus DP72 40. Microscope digital camera

Getting Ready

1. The camera head uses precision components. Handle it with care and avoid subjecting it to a sudden or severe impact.

2. The image displayed on the monitor may be affected when it is used near equipment generating strong electromagnetic

waves. This is not a malfunction and will not affect the actual image being recorded. To avoid interference during

operation, keep the system far from any source of electromagnetic waves.

3. When mounting the camera head on a tripod, attach it by using the DP-TRAD tripod adapter, which is separately available.

4. Do not use the camera in areas where it may be subjected to direct sunlight, high temperature and humidity, dust or

vibrations. (For the operating environment conditions, see chapter 8, "SPECIFICATIONS" on page 29.)

5. The camera head needs to be calibrated periodically (every 3 months as reference) for the level variations caused by the

influence of cosmic rays. For the calibration method, refer to the Camera Calibration Wizard in the Online Manual for the

DP2-TWAIN or DP2-BSW software.

Maintenance and Storage

1. To clean the lenses and other glass components, simply blow dirt away using a commercially available blower and wipe

gently using a piece of cleaning paper (or clean gauze).

If a lens is stained with fingerprints or oil smudges, wipe it with gauze slightly moistened with commercially available

absolute alcohol.

Since the absolute alcohol is highly flammable, it must be handled carefully. To prevent fire ignition, be sure to

keep it away from open flames or potential sources of electric sparks –– for example, electrical equipment that is

being switched on or off.

Also remember to always use these chemicals only in a well-ventilated room.

2. Parts other than the glass components should be cleaned by wiping with a clean cloth. Do not use organic solvents to

remove major stains. Use a soft cloth slightly moistened with a neutral detergent solution.

3. Do not disassemble any part of the camera as this could result in malfunction or reduced performance.

4. When disposing of this product, check your local regulations and rules and be sure to observe them strictly.

Caution

If the equipment is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the

equipment may also be damaged. Always use the equipment as outlined in this instruction manual.

The following symbols are used to set off text in this instruction manual.

: Indicates that failure to follow the instructions in the warning could result in bodily harm to the

user and/or damage to equipment (including objects in the vicinity of the equipment).

# : Indicates that failure to follow the instructions could result in damage to equipment.

} : Indicates commentary (for ease of operation and maintenance).

DP72