AXITEC AC-410MH/144S Manuale di installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di installazione per Inverter AXITEC AC-410MH/144S. AXITEC AC-410MH/144S 17.

hardware that has been tested and evaluated with the module under this standard or by a field

Inspection certifying that the installed module complies with the requirements of UL 1703. The modules

when used with a Listed mounting system that has been rated as a Class C System when installed with

type 1 modules, is suitable to maintain the System Class C Fire Rating. For cUL listed products - Class C

fire rating.

3.1.

Selecting the location

Select a suitable location for installation of the module. The module should be facing true south

in northern latitudes and true north in southern latitudes for best power production.

For detailed information on the best elevation tilt angle for the installation, refer to standard solar

photovoltaic installation guides or a reputable solar installer or systems integrator.

The module should not be shaded at any time of the day. Do not use module near equipment or

in ad loc.

3.2.

Selecting the proper support frame

Always observe the instructions and safety precautions included with the support frame to be

used with the module.

Do not attempt to drill holes in the glass surface of the module. Do not drill additional mounting

holes in the frame of the module. Doing so will void the warranty.

Modules must be securely attached to the mounting structure using four mounting points for

normal installation. If additional wind or snow loads are anticipated for this Installation, the

support module mounting structure must be made of durable corrosion-resistant and UV-

resistant material.

3.3.

Ground mount

Select the height of the mounting system to prevent the lowest edge of the module from being

covered by snow for a long time in winter in areas that experience heavy snowfalls. In addition,

assure the lowest portion of the module is placed high enough so that it is not shaded by plants or

trees or damaged by sand and stones driven by wind.

Installation Manual

Page 3 / 16