Axium AX250i Manuale di installazione e funzionamento - Pagina 6
Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per Amplificatore Axium AX250i. Axium AX250i 13. Two zone: two stereo pre-amplifiers & amplifiers with rs232, keypad & ir control
Stampa la paginaINSTALLATION GUIDE
UNPACKING
Immediately upon receiving your AX250i inspect the carton for evidence of
mishandling during shipment. Then carefully unpack the unit and inspect for
damage.
Please save the shipping carton and all inner packing materials in the event that the
AX250i needs to be shipped for service or moved to a new location.
Should you discover that the AX250i has been damaged during shipping please
contact your dealer immediately.
PRECAUTIONS
1)
Never expose the unit to moisture
2)
Avoid restricting the airflow around the AX250i. Good airflow is necessary to
help ensure proper operation. Not only should you provide enough free space
around the unit, but also ensure that air can flow freely and escape from the
amplifier surroundings. Failure to do so may cause intermittent channel
cutout and reduced life expectancy.
3)
Under no circumstances should the speaker output terminals of the unit be
short circuited, or connected to another output.
4)
Never plug the RS232 cable into the unit while power is connected.
5)
Never short the 10 way controller connector terminals. These should all be
connected before the AX250i is powered.
6)
Avoid installing the AX250i in positions where the front panel is exposed to
direct sun light. This may intermittently slow down the response of the unit to
commands.
7)
Never connect more than four controllers to the unit's 12Vdc-power supply
terminals. The supply is internally poly-fused (self-resetting) and will open
circuit.
8)
Never connect the AX250i's +12Vdc power supply to an external power
supply or other Axium amplifier's +12Vdc output.
4