Olympus BX41 Manuale di istruzioni - Pagina 11

Sfoglia online o scarica il pdf Manuale di istruzioni per Microscope Olympus BX41. Olympus BX41 36. System microscope
Anche per Olympus BX41: Manuale di istruzioni (34 pagine)

Stampa la pagina

Fig. 7

Fig. 8

Fig. 9

Fig. 10

Using the Filter Cassette

Loading Filters into Filter Cassette

}The filter cassette accommodates filters with a diameter of 45 mm and

thickness of 2.7 mm or less.

}The filter cassette has two filter levels on the right side and one on the left

side.

1. Move all filter levers to the OUT position except for the one belonging to

the slot into which the filter is to be inserted.

2. Slide lever @ to the IN position. Make sure that it clicks securely into

place. (Fig. 7)

3. Holding the lever in the position shown in Fig. 7, put the filter into the

cassette by inserting it in the direction indicated by the arrow.

4. Insert the other two filters in the same manner.

Mounting the Filter Cassette

1. Fully loosen the filter cassette clamping screw ². (Fig. 8)

2. Align the key ³ on the bottom surface of the filter cassette with the

positioning slot | on the filter mount, then snap the filter cassette into

place from above.

3. Rotate the filter cassette to align its sides with the base. (Fig. 9)

4. Align the clamping screw ² with the positioning hole ƒ on the filter

mount, then tighten the screw to fasten the filter cassette.

# When the filter cassette is installed, the condenser may hit it when

the stage is lowered. Therefore, exercise caution when lowering the

stage with the filter cassette installed.

Using the Filter Cassette

45LBD-IF*

45ND-6, 45ND-25

45G-530, 45G-533, 45IF550*

45Y-48

45O-560

Up to three of the above filters can be loaded in the filter cassette. Mov-

ing the levers ... on the left and right sides of the cassette to the IN

position brings the corresponding filter into the light path.

* When an IF (Interference) filter is used, flare or ghost may be observed.

The flare or ghost may be reduced by additionally using an ND filter with

the IF filter.

...

(Figs. 7 - 10)

(Fig. 10)

Usable Filters

Color balancing filter

Neutral density filter

Green

Yellow

Orange

BX41

Applications

B&W contrast filter