Olympus BX52 Manuale di istruzioni - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per Microscope Olympus BX52. Olympus BX52 37. System

Safety Symbols

The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment

in the safest possible manner.

Symbol

Warnings

Warning engraving is placed at parts where special precaution is required when handling and using the microscope.

Always heed the warnings.

Getting Ready

Fig. 2

Indicates that the surface becomes hot, and should not be touched with bare hands.

Before use, carefully read the instruction manual. Improper use could result in personal injury to

the user and/or damage to the equipment.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

Warning engraving

position

1. A microscope is a precision instrument. Handle it with care and avoid

subjecting it to sudden or severe impact.

2. Do not use the microscope where it is subjected to direct sunlight, high

temperature and humidity, dust or vibrations. (For the operating condi-

tions, refer to section 5, "SPECIFICATIONS".)

3. When moving the microscope, carefully carry it with the grasping part on

the rear of the arm and the base as shown in Fig. 2 (Weight: approx. 16

kg).

# If a module such as a photographic device is installed, the micro-

scope system will be very heavy. Remove the intermediate attach-

ment before carrying.

# Damage to the microscope will occur if you grasp it by the stage,

coarse/fine adjustment knob or binocular section of the observa-

tion tube.

4. The BX51/52 series can be used with up to two intermediate attach-

ments (e.g. a U-CA magnification changer, U-EPA2 eyepoint adjuster, etc.).

For restrictions when using two intermediate attachments, make sure to

read the instruction manual provided with the respective intermediate

attachments.

Explanation

Lamp housing

(Warning against high temperature)