Olympus CX33 Manuale di istruzioni - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per Microscope Olympus CX33. Olympus CX33 40. Biological microscope
Handling precautions
1.
Be careful not to apply the impact or let the dirt/dust attached to the microscope when carrying it.
2.
Do not use the product in areas where it may be subjected to direct sunlight, high temperature and/or humidity, dust or
vibrations. (For conditions of operating environments, see "7 Specifications" on page 25.)
3.
When installing the microscope, assure sufficient space around the microscope.
4.
When carrying this microscope, disconnect the AC adapter from the microscope, and store the AC adapter and the power
cord in the microscope frame. Then, hold both sides of the arm as shown in the lower left picture, and carry it carefully. Then,
hold both sides of the arm a as shown in the picture on the left, and carry it carefully. (For procedures to store the AC
adapter and the power cord, see "Storing the AC adapter and power cord" on page 32.)
b
NOTE
NOTE
a
c
· This product is a precision instrument. Handle it with care
and avoid subjecting it to a sudden or severe impact.
· Never disassemble any part of the product. Otherwise,
failure could be caused.
· The objectives are screwed in tightly to prevent them from
being loosened during transportation. When removing the
objective, rotate it in the arrow direction as shown in the
picture on the left using the slip prevention rubber sheet,
etc.
· Be sure to use the specified objectives (objectives
provided with the microscope frame and CX-Plan series).
If incorrect objectives are combined, the performance
cannot be delivered.
· The tube of this microscope is removable, but do not
attach the tube of other microscopes.
· Do not hold the stage b or the tube c , since they may
be damaged.
· When carrying the microscope, be sure to remove the
specimen and filters in advance, since they are in a risk of
falling. Also, be careful not to touch the objective.
· Do not carry the microscope keeping the AC adapter
connected to the microscope. The AC adapter or the
microscope may be damaged by hitting the output
connector of the AC adapter.
· When carrying the microscope, be careful not to touch the
objective.
CX33
3