Olympus FH Istruzioni per l'installazione - Pagina 3
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Microscope Olympus FH. Olympus FH 3. Nanodyne replacement illuminator
Anche per Olympus FH: Manuale di istruzioni (22 pagine)
Stampa la pagina
4
Nanodyne Replacement Illuminator for Olympus FH Microscope Installation Instructions: Step 2. Connect Power Supply, Insert Nanodyne Illuminator and Check Focus.
B
A
Copyright 2019 Nanodyne Measurement Systems. Document authorized for installation of Nanodyne equipment only. www.nano-dyne.com Wayne Bonin 651-323-8592
4
3
3
2
Plug in the power supply
and insert the new
illuminator as shown. It will
slide freely in and out.
Look at a sample through
the microscope to find the
best position of the
illuminator for brightness
and/or uniformity.
Noting that position, wrap
enough tape around the
illuminator so it is held in
place by friction when
pushed back in. If it is
pushed in slightly past the
best position, the thumb
screw can be loosened
and the original focusing
mechanism used for
adjustment.
Wayne Bonin
PN 11275 Olympus FH Illuminator
System Installation Instruction
2
1
B
A
4/6/2019
REV
2
3
3
SHEET
OF
1