Olympus SZ61-60 Manuale di istruzioni - Pagina 16

Sfoglia online o scarica il pdf Manuale di istruzioni per Microscope Olympus SZ61-60. Olympus SZ61-60 28. Zoom stereo microscopes
Anche per Olympus SZ61-60: Manuale di istruzioni (28 pagine)

Stampa la pagina

TROUBLESHOOTING GUIDE

Under certain conditions, performance of the microscope may be adversely affected by factors other than defects. If

problems occur, please review the following list and take remedial action as needed. If you cannot solve the problem

after checking the entire list, please contact Olympus.

1. The left and right fields of view

do not coincide.

2. Dirt or dust is visible in the field

of view.

3. Visibility of observed image is

poor.

4. Zooming causes defocusing of

the observed image.

5. The focus adjustment knob does

not rotate smoothly.

6. The microscope body drops

spontaneously, causing the

focusing to be deviated during

observation.

7. The right field of view or the

monitor image is cut off.

8. Zooming causes important

defocusing of the monitor image.

Downloaded from

ManualsNet.com

Problem

Interpupillary distance is adjusted

improperly.

The parallax is not corrected.

The magnifications of the left and

right eyepieces are different.

Dirt/dust on specimen.

Dirt/dust on eyepieces

Dirt/dust on the dustproof glass on

the tip of the objective.

The eyepiece diopter is adjusted

improperly.

The focus adjustment is inaccurate. Adjust the focus accurately.

The rotation tension of the knob is

set too high.

The rotation tension of the knob is

set too low.

The light path selector lever is not

set properly to a stop position.

The confocality of the camera is

adjusted improperly.

search engine

Cause

Adjust it correctly.

Use the eyepieces with the same

magnification for the left and right

by replacing one of them.

Clean thoroughly.

Adjust it correctly.

Decrease the rotation tension to an

optimum level.

Increase the rotation tension to an

optimum level.

Push in or pull out the lever all the

way till the stop position.

Adjust it properly.

Remedy

Page