Olympus U-MDO10B3 Manuale di istruzioni - Pagina 31

Sfoglia online o scarica il pdf Manuale di istruzioni per Microscope Olympus U-MDO10B3. Olympus U-MDO10B3 40. For 2, 5, 9, 10 and 13 persons

Attaching the light path split unit

Attach the light path split unit a provided with U-MDO10R-3 to the

top of U-MDO10R-3 (at assistant observer position), and tighten the

clamping screw b to secure the light path split unit.

TIP

Attach U-MDO10B3 a on the top of U-MDO10R-3 (at main observer

position) and tighten the clamping screw b to secure U-MDO10B3.

TIP

Height of the a portion of the stand

The height of the a portion of the stand to be adjusted after screwing

the stand into U-MDOSV is 69 mm.

TIP

For attaching procedures, see "Attaching the stand" in "5-2 Side by

side observation system for 2 persons and system for 5 persons"

(page 18).

See "Attaching the side viewer" in "5-2 Side by side observation

system for 2 persons and system for 5 persons" (page 19).

Attach the light path split unit a so that the clamping screw

b of U-MDO10R-3 and the clamping screw c of the light

path split unit are aligned in one line perpendicularly.

Attach U-MDO10B3 a so that the clamping screw b of

U-MDO10R-3 and the clamping screw c of U-MDO10B3 are

aligned in one line perpendicularly.

If there is a difference in height between the desk top surface

where the microscope frame is installed and the desk top

surface where U-MDOSV is installed, adjust the length of the

a portion of the stand. For example, if the height difference

is 5 mm (if the desk top surface of the microscope frame is

higher than the desk top surface to install U-MDOSV), a will

be 74 mm.